Make sure the following warnings and cautions have been read and fully understood before driving the vehicle.
Failure to use the camera systems safely could result in damage to the vehicle, or an accident, leading to serious injury or death.
The camera system is available in three modes:
The camera system consists of four cameras, located as follows:
The on-road camera mode allows the user to select the following camera views:
For further information about the on-road camera mode, please refer to the relevant topic in the Owner’s Handbook. See ON-ROAD CAMERA VIEWS.
The off-road camera mode uses the surround cameras to display off road camera views, to assist the driver during off-road driving.
The off-road camera system mode also displays a view of the terrain ahead of the front bumper, ground and under the bonnet. The touchscreen view is generated using recordings from the vehicle’s front camera.
For further information about off-road camera mode, please refer to the relevant topic in the Owner’s Handbook. See OFF-ROAD CAMERA VIEWS.
The towing mode consists of the following camera views:
For further information about towing, please refer to the relevant topic in the Owner’s Handbook. See HITCH ASSIST and TOW ASSIST .
The on-road camera system activates automatically when:
When the camera system is active, the camera views automatically switch, under the following circumstances:
To activate the on-road camera system manually:
Camera icon with automatic collision alerts.¹
Camera icon without automatic collision alerts.²
Depending on the user’s requirement, alternative camera views can be manually selected. To select an alternative camera view, touch the camera view icons from the 360° vehicle plan view:
The selected camera view icon becomes illuminated on the 360° vehicle plan view and image displays on the main display. Alternatively, swipe the main camera screen left or right to display an alternative camera view, or touch the left and right arrows displayed.
To activate the off-road camera system:
Alternatively, the off-road camera system can be activated via the 4x4i screen. See 4X4i OVERVIEW.
The off-road camera displays the following options:
Drive assist icon: Touch to display the drive assist screen.
The camera system is not active when a fault occurs in the camera system.
The camera system does not perform to the best of it’s ability if:
The following may be a reason why the camera system views are no longer displayed on the touchscreen:
The touchscreen displays warning messages to inform the driver of any performance or system issues.
If all of the cameras are clean and the fault is not rectified after an ignition cycle, contact a retailer/authorised repairer.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…