The following warning and information lamps may illuminate the instrument panel:
See BATTERY CHARGE (RED).
USA: SeeBRAKE (RED).
Canada: See BRAKE (RED).
See CRITICAL WARNING MESSAGE (RED).
See ELECTRIC PARKING BRAKE (EPB) (RED).
See ENGINE TEMPERATURE (RED).
See LANE KEEP ASSIST (RED).
See LOW OIL PRESSURE (RED).
See SEAT BELT (RED).
See AIR BAG (AMBER).
See ANTI-LOCK BRAKING SYSTEM (ABS) (AMBER).
See BRAKE (AMBER).
See CHECK ENGINE (AMBER).
See DRIVER CONDITION MONITOR (AMBER).
See DYNAMIC STABILITY CONTROL (DSC) (AMBER).
See DYNAMIC STABILITY CONTROL (DSC) OFF (AMBER).
See EXTERNAL TEMPERATURE (AMBER).
See GENERAL WARNING AND INFORMATION MESSAGE (AMBER).
See LOW FUEL WARNING (AMBER).
See REAR FOG LIGHTS (AMBER).
See TIRE PRESSURE MONITORING SYSTEM (TPMS) (AMBER).
See ADAPTIVE CRUISE CONTROL ACTIVE (GREEN).
See ADAPTIVE SPEED LIMITER (GREEN).
See ALL TERRAIN PROGRESS CONTROL (ATPC) (GREEN).
See AUTO STOP/START (GREEN).
See BRAKE HOLD (GREEN).
See CRUISE CONTROL (GREEN).
See ECO COACH PEDAL NOT PRESSED (GREEN).
See ECO COACH PEDAL PRESSED (GREEN).
See FOLLOW MODE (GREEN).
See FRONT FOG LIGHTS (GREEN).
See GEARSHIFT (GREEN).
See HILL DESCENT CONTROL (HDC) (GREEN).
See LANE KEEP ASSIST (GREEN).
See LOW BEAM (GREEN).
See LOW RANGE (GREEN).
See SIDELIGHTS (GREEN).
See SPEED LIMITER (GREEN).
See STEERING ASSIST ACTIVE (GREEN).
See TRAILER TURN SIGNALS (GREEN).
See TURN SIGNALS (GREEN).
See AUTO HIGH BEAM ASSIST (AHBA) (BLUE).
See HIGH BEAM (BLUE).
See STEERING ASSIST NOT ACTIVE (GRAY).
See AUTO HIGH BEAM ASSIST (AHBA) (WHITE).
See AUTO LIGHTS (WHITE).
See AUTO STOP/START INHIBIT (WHITE).
See AUTO STOP/START OFF (WHITE).
See DRIVER CONDITION MONITOR (WHITE).
See LOW TRACTION LAUNCH (WHITE).
See TIRE PRESSURE MONITORING SYSTEM (TPMS) LIGHT LOAD (WHITE).
The 12V battery charge warning lamp illuminates, as a bulb checks when the vehicle’s ignition is switched on.
The lamp extinguishes when the engine is started.
If the lamp remains on or illuminates while driving, there is a fault with the battery charging system. The instrument panel displays a warning message. Seek qualified assistance urgently.
The critical warning message lamp illuminates when a relevant message is displayed in the instrument panel.
Stop the vehicle as soon as safety permits, and investigate the cause of the warning.
The USA.
Canada.
The Electric Parking Brake (EPB) warning lamp illuminates if the EPB is correctly applied.
If the lamp flashes, a fault has been detected. Seek qualified assistance urgently.
The engine temperature warning lamp illuminates when the engine’s temperature is too high.
The instrument panel also displays a warning message.
Stop the vehicle as soon as safety permits. Seek qualified assistance before continuing.
The red lane keeps assist warning lamp illuminates if the vehicle crosses a lane marking without the appropriate turn signal being operated.
The illumination of the lamp is accompanied by a vibration, felt through the steering wheel.
The left or right lane illuminates, depending on which lane boundary is being crossed.
If the low oil pressure warning lamp flashes or illuminates while driving, stop the vehicle as soon as safety permits. Switch off the engine immediately.
Check and top up the oil level, if necessary. Start the engine. If the lamp remains illuminated, switch the engine off immediately. Seek qualified assistance before continuing.
When the vehicle is in motion and seats are occupied, the warning lamp illuminates, accompanied by a chime if the seat belt is unbuckled.
The lamp extinguishes when the relevant seat belt is buckled.
The airbag warning lamp illuminates, as a bulb checks when the vehicle’s ignition is switched on. The lamp extinguishes after 6 seconds.
If the lamp illuminates again, after the bulb check or while driving, there is a fault with the airbag system. Seek qualified assistance as soon as possible.
The ABS warning lamp illuminates briefly, as a bulb checks when the vehicle’s ignition is switched on.
If the lamp remains on or illuminates while driving, there is a fault with the ABS system. Drive with care, avoiding heavy brake pedal application. Seek qualified assistance urgently.
The USA.
Canada.
The brake warning lamp illuminates briefly, as a bulb checks when the vehicle’s ignition is switched on.
If the lamp illuminates amber after starting the engine, or while driving, suspect worn brake pads or a fault with the braking system. The vehicle can still be driven with care. Seek qualified assistance urgently.
The check engine warning lamp illuminates when the vehicle’s ignition is switched on. The lamp remains illuminated until the engine starts. If the lamp illuminates when the engine is running, an emissions-related fault has been detected. The vehicle remains safe to drive with the lamp illuminated, although qualified assistance should be sought as soon as possible. With the lamp illuminated, the vehicle may enter limp-home mode. Limp-home mode reduces vehicle performance to safeguard against any further damage to the vehicle. See LIMP-HOME MODE. If the check engine warning lamp flashes when the engine is running, reduce the vehicle’s speed as soon as it is safe to do so. Seek qualified assistance immediately.
The driver condition monitor warning lamp illuminates amber when the driver condition monitor system determines that the driver is presenting signs of tiredness. The instrument panel also displays a warning message.
The Dynamic Stability Control (DSC) lamp flashes when the system is active. If there is a fault with the system, it remains illuminated and the instrument panel displays a warning message. The vehicle can still be driven but without DSC assistance. Seek qualified assistance as soon as possible.
The Dynamic Stability Control (DSC) OFF warning lamp illuminates when the system is switched off. The lamp is accompanied by a chime and a confirmation message in the instrument panel.
The external temperature lamp illuminates when the external temperature is low enough that ice may be present on the road.
The general warning and information message lamp illuminate when a non-critical warning message, or an information message, is available in the instrument panel.
The low fuel warning lamp illuminates when the fuel level is low. Refuel at the earliest opportunity. The arrow shows which side of the vehicle the fuel filler flap is located.
The rear fog lights indicator lamp illuminates when the rear fog lights are switched on.
The Tire Pressure Monitoring System (TPMS) lamp illuminates amber to warn that one or more tires are significantly under-inflated. Stop the vehicle as soon as possible, when safe to do so. Check the tire pressures. Inflate to the recommended pressure.The lamp flashes to indicate a system fault.
The adaptive cruise control lamp illuminates when the adaptive cruise control feature is active.
The adaptive speed limiter lamp illuminates when the adaptive speed limiter feature is switched on.
The All Terrain Progress Control (ATPC) lamp illuminates to confirm that the ATPC system is enabled.
The auto stop/start lamp illuminates when the engine is shut down by the auto stop/start system.
The brake hold lamp illuminates when a brake hold function is activated.
The cruise control lamp illuminates green when cruise control is active.
The ECO coach pedal not pressed lamp illuminates green to advise the driver when it is possible to lift off of the accelerator pedal.
The ECO coach lamp illuminates green when the feature is active.
The follow mode lamp illuminates green when the adaptive cruise control system is in follow mode.
The front fog lights lamp illuminates when the front fog lights are switched on.
The gearshift indicator lamp illuminates briefly at the recommended gear change point (up-shift). The gearshift indicator lamp does not illuminate while cruise control is active and is not being overridden by pressing the accelerator pedal.
The Hill Descent Control (HDC) lamp illuminates continuously when the HDC system is selected and HDC operating conditions are met.
If the lamp flashes, HDC has been selected, but the operating conditions are not being met or HDC fade-out is occurring.
The green lane keeps assist warning lamp illuminates if the feature is enabled and the system is tracking the lanes.
The low beam lamp illuminates when the low beam headlights are switched on.
The low range lamp illuminates when the low range is selected.
The side lights lamp illuminates when the side lights are switched on.
The speed limiter lamp illuminates when the speed limiter feature is active.
The steering assists active lamp illuminates green when the feature is active.
The trailer turn signals lamp illuminates, as a bulb checks when the vehicle’s ignition is switched on. The lamp extinguishes when the engine is started. If a trailer is attached, the warning lamp flashes in conjunction with the turn signal warning lamp. If the lamp fails to flash, the turn signal bulb on the trailer may be faulty.
The appropriate turn signal lamp left or right flashes when the column control is moved up or down to signal a turn.
The Auto High Beam Assist (AHBA) lamp illuminates blue when the AHBA feature has activated the high beam headlights.
The high beam lamp illuminates when the high beam headlights are switched on or flashed.
The steering assists, not the active lamp illuminates gray when the feature is not active.
The Auto High Beam Assist (AHBA) lamp illuminates white when the AHBA feature is active.
The auto lights warning lamp illuminates white when the vehicle’s exterior lights are operating in auto mode.
The auto stop/start inhibit lamp illuminates when the auto stop/start system is active but a vehicle system requires the engine to run.
The auto stop/start OFF lamp illuminates white when the auto stop/start system is switched off.
The driver condition monitor warning lamp illuminates white when the driver condition monitor system determines the driver is presenting signs of fatigue.
The lamp is accompanied by a message in the instrument panel.
The Tire Pressure Monitoring System (TPMS) light load lamp illuminates to confirm that the TPMS Light load setting is selected. The lamp illuminates briefly when the vehicle’s ignition is switched on, and the TPMS Light load is selected.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…