Do not adjust the touchscreen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents, potentially causing serious injury or death.
To access the front climate screen, select CLIMATE from the Apps screen. See APPS SCREEN.
Alternatively, press the climate button located below the touchscreen (13).
Air ionization technology is designed to improve the air quality within the cabin.
In cold ambient conditions, the windshield and rear screen heaters switch on automatically when the engine is started. The function can be switched on or off via climate settings. See CLIMATE SETTINGS.
The heated windshield operates only when the engine is running.
Do not attach labels to the rear screen. Do not scrape or use abrasive materials to clean the inside of the rear screen.
The heated rear screen operates only when the engine is running.
Press briefly to select timed recirculation. Recirculation switches off automatically after a set time, dependent on the ambient temperature.
Press and hold to select latched recirculation. Recirculation remains on until the button is pressed again.
Prolonged use may cause the windows to mist.
The blower speed is automatically set in AUTO mode. Adjusting the blower speed cancels AUTO mode.
AUTO mode is the recommended normal operating mode. In AUTO mode, the system regulates cabin climate based on feedback from the vehicle’s sensors, helping maintain a stable and comfortable cabin environment.
When a climate setting is adjusted manually the system exits full AUTO mode, this overrides automatic climate adjustment and delivers only the selected settings.
Some of the buttons have an LED indicator lamp that illuminates to confirm selection.
If the climate control system is switched off, pressing the AUTO button or the defrost button switches the climate control system on.
Water expelled by the A/C system may collect underneath the vehicle, when parked. The expelled water is not a cause for concern.
United States of America, Federal Insecticide, Fungicide, and Rodenticide Act (FIFRA):
This vehicle, which may be fitted with a regulated pesticide device (air ionizer) was produced at the following facility: EPA Est. 93184-SVK-1
California Air Resources Board (ARB), Air Cleaning Devices Regulation:
The following applies to the air ionizer device that may be fitted in this vehicle:
The climate control system monitors exterior air pollution, and selects recirculation if it reaches a predetermined level. Automatic recirculation only operates when the Air Purity function is active. The sensitivity of the air quality sensor can be set via the Climate Settings screen. See AIR QUALITY SENSOR.
It is recommended that automatic recirculation is enabled, to maintain the optimum air quality within the vehicle.
To view the Climate settings menu, touch the settings icon, then select Climate. See FRONT CLIMATE CONTROL.
To enable Air Purity:
To access the second row climate screen, touch the 2nd Row soft key on the front climate screen. See FRONT CLIMATE CONTROL.
Control the rear climate as follows:
The rear climate can be adjusted with the controls located in the rear of the center console.
Control the rear climate as follows:
Some of the buttons have an LED indicator lamp that illuminates to confirm selection.
In addition to the selectable controls, the second row climate screen displays symbols that indicate the status of heating and ventilation functions.
If the climate control system is switched off, pressing the rear AUTO button switches the climate control system on.
If the system is in defrost mode, all rear controls are disabled and no airflow is available to the rear occupants.
THIRD ROW CLIMATE CONTROL:
To access the third row climate screen, touch the 3rd Row soft key on the front climate screen. See FRONT CLIMATE CONTROL.
Control the rear chiller from the touchscreen as follows:
The chiller for the third row can also be adjusted using the control at the rear of the vehicle.
The third row chiller provides chilled air through the rear side vents.
Rotate the control to adjust the fan speed.
Depending on the specification of the vehicle, the seats may have heated and cooled functionality.
Seat heaters consume a large amount of battery power and only operate when the engine is running.
The seat temperature can be adjusted in the following manner:
To access the seat screen, select SEATS from the Apps screen. See TOUCHSCREEN HOME MENU.
To adjust the seat temperature via the touchscreen:
To adjust the seat temperature via the rotary controls:
Heated seat icon.
The third row heated seats are operated by the buttons located in the side trim panels.
To operate the third row heated seats:
The temperatures selected via the climate control system are perceived values. The system operates to achieve these selected values. The selected value does not represent the output temperature from the air vents. Air vent output temperature varies as the system automatically adjusts the vent outputs to achieve the set temperatures.
The actual temperature in the cabin may differ from the set temperatures due to internal and external factors, including ambient temperature, sun load, and direction. The climate control system automatically adjusts the airflow level, direction, and temperature to compensate for these internal and external factors. Automatic adjustments in the air vent outputs may result in some temperature differentiation within the cabin.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…