2023 Land Rover NEW RANGE ROVER VEHICLE PRECONDITIONING
VEHICLE PRECONDITIONING SAFETY
Make sure to have read and fully understood the following warnings before using vehicle preconditioning or any of its features. Failure to observe warnings and cautions may result in vehicle damage, injury, or death in the event of an accident.
Do not adjust the touchscreen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents.
Before attempting to perform any repairs on a vehicle, consult a retailer/authorized repairer.
VEHICLE PRECONDITIONING OVERVIEW
Make sure all relevant safety warnings have been read and understood before driving the vehicle. See VEHICLE PRECONDITIONING SAFETY .
The timed climate preconditioning system, when in operation, provides a comfortable temperature inside the cabin, in advance of using the vehicle. It also assists vehicles start in low temperatures. When leaving the vehicle for a short period of time, using the Precondition now option can also maintain a temperature.
Timed departure preconditioning can be controlled via the touchscreen controls. Additionally, it can be operated via a remote climate app. See DEPARTURE TIMES.
The manual preconditioning can be controlled via the lower touchscreen controls. Additionally, it can be operated via a remote climate app or by using the timed climate remote. See PRECONDITIONING SETTINGS.
The timed climate system may not operate, or switches off automatically, in the following scenarios:
- If the fuel level is low.
- If the vehicle’s high voltage battery charge is low.
- If the coolant temperature is subjected to extreme cold climate conditions. In extreme cold climate conditions, if an engine pre-heater is fitted, it overrides a vehicle preconditioning program.
- If the system has been in operation for 30 minutes.
- If a timed event has been activated within the previous 30 minutes.
DEPARTURE TIMES
Make sure all relevant safety warnings have been read and understood before driving the vehicle. See VEHICLE PRECONDITIONING SAFETY .
The touchscreen can be used to either preset activation times or to operate the system manually.
When the system is operating, the Maximum defrost icon’s LED flashes. The choice of operation is automatically determined by the system, depending on the external temperature.
The system ceases operation if the engine is started.
![2023-Land-Rover-NEW-RANGE-ROVER-VEHICLE-PRECONDITIONING-fig](https://blownfuse.co/wp-content/uploads/2022/08/2023-Land-Rover-NEW-RANGE-ROVER-VEHICLE-PRECONDITIONING-fig.png)
To access the VEHICLE DEPARTURES screen, select Vehicle Departures from the APPS page. See APPS SCREEN.
The vehicle departures screen consists of the following:
- Time.
- Date.
- Current time.
- Departure times: Touch to select a departure time and day within the calendar area.
- Settings icon: Touch to select the preconditioning departure settings. See PRECONDITIONING SETTINGS.
- Power icon: Touch to switch on or off.
The time format, 12 or 24-hour clock, is determined by the time settings currently selected in the touchscreen’s system settings. See SYSTEM SETTINGS.
When the power is switched off, the settings are maintained and will be available again when the power is switched back on.
To access the preconditioning NEW DEPARTURE screen, select a day and time in the VEHICLE DEPARTURES screen. Select the Timed Climate soft key.
Use the displayed menu to set a single or repeated departure time:
- Information icon: For an overview of vehicle preconditioning.
- Timed climate: Runs a timed climate cycle to set the desired cabin temperature.
NOTES
Vehicles fitted with a clean air pack run a purifying cleaning cycle with the timed climate function. However, the main function of timed climate is temperature control. More details about clean air pack features are described in the Climate and Comfort section. See AIR QUALITY. - Preferred charging period: Sets the desired charging window, e.g. to allow the use of a cheaper electricity tariff.
- Save: Saves the currently selected timings.
- Edit: Edits the preconditioning timings.
- Once only: Use this facility for a one-off preconditioning event.
- Hours: Up or down. The AM/PM toggle is shown to the right of the time selection counter.
- Minutes: Up or down.
PRECONDITIONING SETTINGS
Make sure all relevant safety warnings have been read and understood before driving the vehicle. See VEHICLE PRECONDITIONING SAFETY .
To access the DEPARTURE SETTINGS screen, select the settings icon. Select Departure Settings from the SETTINGS menu. See DEPARTURE TIMES.
The DEPARTURE SETTINGS screen allows the customization of the departure settings.
![2023-Land-Rover-NEW-RANGE-ROVER-VEHICLE-PRECONDITIONING-2](https://blownfuse.co/wp-content/uploads/2022/08/2023-Land-Rover-NEW-RANGE-ROVER-VEHICLE-PRECONDITIONING-2.png)
Timed climate preconditioning settings may be adjusted as follows:
- Optimize vehicle departures for Select between cabin Comfort or vehicle Range as a preconditioning preference.
Comfort: Select to perform timed climate preconditioning events, even if the vehicle is not connected to a high voltage battery charging source. The high voltage battery range is reduced when this option is selected.
Range: Select to save battery charge. Timed climate preconditioning events are not performed if the vehicle is not connected to a high voltage battery charging source.
- Preferred charging period: Select to set the charge time to benefit from off-peak tariffs when charging. Once selected, touch the up and down arrow keys to manually adjust the time further. For further information on vehicle charging, see the My Electric Vehicle (My EV) topic. See MY ELECTRIC VEHICLE (EV).
- Fuel heater for cabin preconditioning: Selects the use of the cabin fuel heater for cabin preconditioning.
NOTES
Fuel heater is not available in certain markets.
Vehicles fitted with a clean air pack will run a purifying-cleaning cycle during a timed climate event, however, the primary function of timed climate is temperature control. See AIR QUALITY.