2022 Kawasaki Z900 SE Specifications
Specifications
PERFORMANCE
Minimum Turning Radius 2.9 m (9.5 ft)
DIMENSIONS
- Overall Length 2 070 mm (81.50 in.)
- Overall Width 825 mm (32.5 in.)
- Overall Height 1 115 mm (43.90 in.)
- Wheelbase 1 455 mm (57.28 in.)
- Road Clearance 145 mm (5.71 in.)
- Curb Mass 213 kg (470 lb)
ENGINE
- Type DOHC, 4-cylinder, 4-stroke, liquid-cooled
- Displacement 948 cm3 (57.8 cu in.)
- Bore x Stroke 73.4 x 56.0 mm (2.89 x 2.20 in.)
- Compression Ratio 11.8:1
- Starting System Electric starter
- Cylinder Numbering Method Left to right, 1-2-3-4
- Firing Order 1-2-4-3
- Fuel System FI (Fuel Injection)
- Ignition System Battery and coil (transistorized ignition)
- Ignition Timing (Electronically advanæd) 100 BTDC 100 r/min (rpm) 460 BTDC 200 r/min (rpm).
- Type NGK CR9ElA-9
- Gap 0.8 – 0.9 mm (0.031 – 0.035 in.)
- Lubrication System Foræd lubrication (wet sump)
- Engine Oil:
- Type API SG, SH, SJ, SL or SM with JASO MA, MAI or MA2
- Viscosity SAE IOW-40
- Capacity 4.0 L (4.2 US qt) 2.4 L (2.5 US qt
- Coolant Capacity 2.4 L (2.5 US qt)
TRANSMISSION
- Transmission Type 6-speed, constant mesh, return shift
- Clutch Type Wet, multi-disc
- Driving System Chain drive
- Primary Reduction Ratio 1.627 (83/51)
- Final Reduction Ratio 2.933 (44/15)
- Overall Drive Ratio 4.938 (Top gear)
- Gear Ratio:
- 1st 2.692 (35/13)
- 2nd 2.059 (35/17)
- 3rd 1.650 (33/20)
- 4th 1.409 (31/22)
- 5th 1.222 (33/27)
- 6th 1.034 (30/29)
FRAME
- Caster 24.90
- Trail 110 mm (4.33 in.)
- Tire Size:
- Front 120/70ZR17 MIC (58W)
- Rear 180/55ZR17 M/C (73W)
- Rim Size:
- Front 17M/C x MT3.50
- Rear 17WC x MT5.50
- Fuel Tank Capacity 17 L (4.5 US gal)
- Brake Fluid:
- Front DOT4
- Rear DOT4
ELECTRICAL EQUIPMENT
- Battery 12 V 8 Ah (10 HR)
- Headlight:
- High Beam LED
- Low Beam LED
- City Light LED
- Brake/Tail Light LED
- Turn Signal Light 12 V 10 W (WYIOW)
- License Plate Light LED
Even if any one element of LED (Light Emitting Diode) light does not go on, consult with an authorized Kawasaki dealer.
Brake/tail Light
The brake/tail light goes on as below.
A. When the ignition switch is turned on.
B. When the brakes are applied.
When the ignition switch is turned on, some LED does not go on, however, it is normal. Specifications are subject to change without notice.