2022 Kawasaki Z900 SE Fuses Owners Manual

2022 Kawasaki Z900 SE Fuses

Fuses

Fuses are arranged in the fuse boxes located under the rider’s seat and left middle fairing. The main fuse is located under the rider’s seat. If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper am- perage. If the fuse fails repeatedly, there is something wrong with the electrical system. Have the motorcycle checked by an authorized Kawasaki dealer. The main fuse removal should be done by an authorized Kawasaki dealer.

A. Fuse Boxes
B. Main Fuse

To access the main fuse and the fuse box (under the rider’s seat):

• Remove the rider’s seat (see Seats section in the GENERAL INFORMATION chapter).
• Check the fuses.

A. Fuse Box
B. Main Fuse

Install the rider’s seat (see Seats section in the GENERAL INFORMA- TION chapter). To access the fuse box (under the left middle fairing): Remove the bolt and collar.

A. Bolt
B. Collar

• Remove the bolts and washers.
• Remove the quick rivet.

A. Bolts and Washers
B. Quick Rivet

Pull the left middle fairing outward to clear the projections, and remove the left middle fairing backward to clear the tab.

A. Projections
B. Tab
C. Left Middle Fairing

• Disconnect the regulator/rectifier lead connector.
• Remove the left middle fairing.

A. Regulator/Rectifier Lead Connector
B. Left Middle Fairing

• Check the fuses.

A. Fuse Box

• Connect the regulator/rectifier lead connector.
• Insert the slot of the left middle fairing to the tab on the fuel tank.
• Insert the projections into the grommets.

A. Slot
B. Tab
C. Projections
D. Grommets
E. Left Middle Fairing

Install the removed parts.

WARNING
Substituting fuses can cause the wiring to overheat, catch fire and/or fail. Do not use any substitute for the standard fuse. Replace the blown fuse with a new one of the correct capacity, as specified on the fuse boxes and main fuse.

A. Normal
B. Failed