2022 Kawasaki Z900 RS Throttle Control System Owners Manual

2022 Kawasaki Z900 RS Throttle Control System

Throttle Control System

Throttle Grip

Throttle Grip Free Play Inspection

• Check that the throttle grip moves smoothly from full open to close, and the throttle closes quickly and completely by the return spring in all steering positions.
• If the throttle grip does not return properly, have the throttle control system checked by an authorized Kawasaki dealer.
• Check the throttle grip free play by turning back and forth.

A. Throttle Grip
B. Throttle Grip Free Play

Throttle Grip Free Play
2 – 3 mm (0.08 0.12 in.)

If there is improper play, adjust it.

Throttle Grip Free Play Adjustment

• Slide the dust covers.
• Loosen the locknuts at the upper ends of the throttle cables, and screw both throttle cable adjusters completely so as to give the throttle grip plenty of play.
• Turn the decelerator cable adjuster until there is no play when the throttle grip is completely closed. Tighten the locknut.

A. ZR900C
B. ZR900E
C. Dust Covers
D. Decelerator Cable
E. Accelerator Cable
F. Adjusters
G. Locknuts

• Turn the accelerator cable adjuster until 2 – 3 mm (0.08 0.12 in.) of throttle grip play is obtained. Tighten the locknut.
• Slide the dust covers to the original position.
• If the throttle cables cannot be adjusted with the adjuster at the upper end of the throttle cable, further adjustment of the throttle cables should be done by an authorized Kawasaki dealer.
• With the engine idling, turn the handlebars to each side. If handlebars movement changes the idle speed, the throttle cables may be improperly adjusted or incorrectly routed, or they may be damaged. Be sure to correct any of these conditions before riding

WARNING
Operation with improperly adjusted, incorrectly routed, or damaged cables could result in unsafe riding conditions. Be sure the control cables are adjusted and routed correctly and are free from damage.