2022 Kawasaki Z650 Specifications
Specifications
PERFORMANCE
Minimum Turning Radius 2.6 m (8.5 ft)
DIMENSIONS
- Overall Length 2 055 mm (80.91 in.)
- Overall Width 765 mm (30.1 in.)
- Overall Height 1 065 mm (41.93 in.)
- Wheelbase 1 410 mm (55.51 in.)
- Road Clearance 130 mm (5.12 in.)
- Curb Mass:
- ER650K 187 kg (412 lb) (CAL) 188 kg (415 lb)
- ER650L 185 kg (408 lb) (CAL) 186 kg (410 lb)
ENGINE
- Type DOHC, 2-cylinder, 4-stroke, liquid-cmed
- Displacement 649 cma (39.6 cu in.)
- Bore x Stroke 83.0 x 60.0 mm (3.27 x 2.36 in.)
- Compression Ratio10.8:1
- Starting System Electric starter
- Cylinder Numbering Method Left to right, 1-2
- Firing Order 1-2
- Fuel System FI (Fuel Injection)
- Ignition System Battery and coil (transistorized ignition)
- Ignition Timing (Electronically advanced) 100 BTDC @1 300 rimin (rpm) – 470 BTDC 000 r/min (rpm)
- Spark Plug.
- Type NGK CR9ElA-9
- Gap 0.8 0.9 mm (0.031 0.035 in.)
- Lubrication System Forced lubrication (Semi-dry sump)
- Engine Oil:
- Type API SG, SH, SJ, SL or SM with JASO MA, MAI or MA2
- Viscosity SAE low-40
- Capacity 2.3 L (2.4 US qt)
- Coolant Capacity 1.2 L (1.3 US qt)
TRANSMISSION
- Transmission Type 6-speed, constant mesh, return shift
- Clutch TypeWet, multi-disc
- Driving System Chain drive
- Primary Reduction Ratio 2.095 (88/42)
- Final Reduction Ratio 3.067 (46/15)
- Overall Drive Ratio 5.473 (Top gear)
- Gear Ratio:
- 1st 2.438 (39/16)
- 2nd 1.714 (36/21)
- 3rd 1.333 (32/24)
- 4th 1.111 (30/27)
- 5th 0.966 (28/29)
- 6th 0.852 (23/27)
FRAME
- Caster 24.00
- Trail 100 mm (3.94 in.)
- Tire Size:
- Front 120/70ZR17 WC (58W)
- Rear 160/60ZR17 WC (69W)
- Rim Size:
- Front 17M/C x MT3.50
- Rear 17M/C x MT4.50
- Fuel Tank Capacity 15 L (4.0 US gal)
- Brake Fluid:
ELECTRICAL EQUIPMENT
- Battery 12 V 8.6 Ah (10 HR)
- Headlight:
- High Beam LED
- Low Beam LED
- City Light LED
- Brake/Tail Light LED
- Turn Signal Light:
- Front 12 V 10 W (WYIOW)
- Rear 12 V 10 W (WYIOW)
- License Plate Light 12 v 5 w (W5W)
CAL: California model
Even if any one element of LED (Light Emitting Diode) light does not go on, consult with an authorized Kawasaki dealer.
Brake/Tail Light
The brake/tail light goes on as below.
A. When the ignition switch is turned on.
B. When the brakes are applied.
When the ignition switch is turned on, some LED does not go on, however, it is normal. Specifications are subject to change without notice.