2022 Kawasaki Z125 Pro Clutch
Clutch
Clutch Operation Inspection
- Check that the clutch lever operates properly and that the inner cable slides smoothly. If there is any irregularity, have the clutch cable checked by an authorized Kawasaki dealer.
- Check the clutch lever free play as shown.
Clutch Lever Free Play
2- 3 mm (0.08 0.12 in.)
A. Adjuster
B. Locknut
C. Clutch Lever Free Play
If the free play is incorrect, adjust the lever free play as follows.
Clutch Lever Free Play Adjustment
- Loosen the locknut at the clutch lever.
- Turn the adjuster so that the clutch lever will have the specified free play.
WARNING
Excess clutch lever free play could prevent clutch disengagement and cause a crash resulting in serious injury or death. When adjusting the clutch lever free play, be sure the upper end of the clutch outer cable is fully seated in its fitting so that it doesn’t slip into place later and create an excessive free play. - Tighten the locknut.
- If it cannot be done, have the clutch lever free play adjusted by an authorized Kawasaki dealer.
NOTE
After the adjustment is made, start the engine and check that the clutch does not slip and that it releases properly.