2022 Kawasaki Vulcan S Specifications
Specifications
PERFORMANCE
Minimum Turning Radius 3.2 m (10.5 ft)
DIMENSIONS
- Overall Length 2 310 mm (90.94 in.)
- Overall Width 880 mm (34.6 in.)
- Overall Height
- (EN650CID) 1 100 mm (43.31 in.)
- (EN650E/L) 1 130 mm (44.49 in.)
- Wheelbase 1 575 mm (62.01 in.)
- Road Clearance 130 mm (5.12 in.)
- Curb Mass
- (EN650C) 223 kg (492 lb)
- (EN650D) 226 kg (498 lb)
- (EN650E) 228 kg (503 lb)
- (EN650L) 225 kg (496 lb)
ENGINE
- Type DOHC, 2-cylinder, 4-stroke, liquid-cooled
- Displacement 649 cm3 (39.6 cu in.)
- Bore x Stroke 83.0 x 60.0 mm (3.27 x 2.36 in.)
- Compression Ratio 10.8•.1
- Starting System Electric starter
- Cylinder Numbering Method Left to right, 1-2
- Firing Orders 1-2
- Fuel System FI (Fuel Injection)
- Ignition System Battery and coil (transistorized ignition)
- Ignition Timing (Electronically advancæd) 50 BTDC 300 r/min (rpm) 420 BTDC 600 r/min (rpm)
- Spark Plug:
- Type NGK CR9ElA-9
- Gap 0.8 0.9 mm (0.031 0.035 in.)
- Lubrication System Forced lubrication (Semi-dry sump)
- Engine Oil:
- Type API SC, SH, SJ, SL, or SM with JASO MA, MAI or MA2
- Viscosity SAE low-40
- Capacity 2.3 L (2.4 US qt)
- Coolant Capacity 1.4 L (1.5 US qt)
TRANSMISSION
- Transmission Type 6-speed, constant mesh, return shift
- Clutch Type Wet, multi-disc
- Driving System Chain drive
- Primary Reduction Ratio 2.095 (88/42)
- Final Reduction Ratio 3.067 (46/15)
- Overall Drive Ratio 5.473 (Top gear)
- Gear Ratio:
- 1st 2.438 (39/16)
- 2nd 1.714 (36/21)
- 3rd 1.333 (32/24)
- 4th 1.111 (30/27)
- 5th 0.966 (28/29)
- 6th 0.852 (23/27)
FRAME
- Caster 31.00
- Trail 120 mm (4.72 in.)
- Tire Size:
- Front 120/70R18 WC 59H
- Rear 160/60R17 WC 69H
- Rim Size:
- Front 18M/C MT3.50
- Rear 17M/C x MT4.50
- Fuel Tank Capacity 14 L (3.7 US gal)
- Brake Fluid:
ELECTRICAL EQUIPMENT
- Battery 12 V 8.6 Ah (10 HR)
- Headlight:
- High Beam 12 v 60 w
- Low Beam 12 v 55 w
- Brake/Tail Light LED
Even if one of LED (Light Emitting Diode) brake/tail light does not go on, consult with an authorized Kawasaki dealer. Specifications are subject to change without notice.