2022 Kawasaki Vulcan 1700 Vaquero ABS Saddlebags
Saddlebags
The saddlebags are provided at both sides of the rear wheel to carry baggage.
To open the saddlebag lid
- Insert the ignition key into the lid lock, and then turn the ignition key counterclockwise.
- Pull the knob outward all the way to open the saddlebag lid.
A. Ignition Key
B. Lid Lock
C. Saddlebag
D. Knob
To close the saddlebag lid
- While holding the knob pulled fully out, push the lid back against the saddlebag all the way.
- Release the knob, and then turn the key clockwise and pull it out.
- Pull the knob to make sure the lid is securely locked.
To remove the saddlebag
Open the saddlebag lid and take off the bolts inside the saddlebag, and then pull up the saddlebag.
A. Bolts
To install the saddlebag
- While aligning the protrusions on the bottom of the saddlebag with the holes in the lower bracket, engage the hook on the back of the saddlebag with the upper bracket, then push it down.
- Install the bolts and tighten them securely.
A. Hook
B. Protrusions
C. Upper Bracket
D. Holes
WARNING
Overloading the motorcycle with cargo and/or passengers, and/or not balancing the weight of items carried in each saddlebag may cause adverse handling, loss of control and an accident resulting in serious injury or death. Do not carry loads of more than 7 kg (15 lb) in each saddlebag. Distribute the load equally on both sides of the motorcycle to minimize imbalance. Do not exceed the total payload limit of 180 kg (397 lb), including rider, passenger, baggage, and accessories. Do not exceed the vehicle speed of 130 km/h (80 mph) when carrying a passenger and/or cargo. Also reduce speed according to road or weather conditions, etc. Failure to adjust the speed to compensate for added weight and other conditions may result in a loss of control and subsequent accident.
NOTICE
Do not sit on the saddlebags. Do not put a load on the saddlebag lids.