NOTICE
After riding on the normal road, the unpaved road and in the rainy weather, clean off any dirt (grit, mud or insect etc.) that is stuck to the inner tube before it hardens. If the motorcycle keeps running with the dirt stuck to the inner tube, the oil seal will be damaged and it causes the oil to leak.
Spring Preload Adjustment
The spring preload adjuster on the rear shock absorber has 5 positions.
Standard
3rd position
Remove the bolts and collars.
Pull the left side cover outward to clear the projections, and remove the left side cover.
B. Left Side Cover
In accordance with the setting table, turn the preload adjuster with the wrench from the tool kit.
B. Wrench
C. Handle
Insert the projections of the left side cover into the grommets.
B. Grommets
C. Left Side Cover
Tighten the bolts with the collars.
Rear Shock Absorber Spring Preload Setting
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…