2022 Kawasaki VERSYS -X 300 ABS Brake Light Switches Owners Manual

2022 Kawasaki VERSYS -X 300 ABS Brake Light Switches

Brake Light Switches

Brake Light Switch Inspection

• Turn the ignition switch on.
• The brake light should go on when the front brake is applied.
• If it does not, ask your authorized Kawasaki dealer to inspect the front brake light switch.
• Check the operation of the rear brake light switch by depressing the brake pedal. The brake light should go on after the proper pedal travel.

A. Brake Pedal
B. 10 mm (0.39 in.)

If the light does not come on, adjust the rear brake light switch.

Brake Pedal Travel
10 mm (0.39 in.)

Brake Light Switch Adjustment
Remove the bolts and collars.

A. Bolts and Collars

Pull the right side cover outward to clear the projections, and remove the right side cover.

A. Projections
B. Right Side Cover

To adjust the rear brake light switch, move the switch up or down by turning the adjusting nut.

A. Rear Brake Light Switch
B. Adjusting Nut
C. Lights sooner
D. Lights later

NOTICE
To avoid damaging the electrical connections inside the switch, be sure that the switch body does not turn during adjustment.

Insert the projections of the right side cover into the grommets.

A. Projections
B. Grommets
C. Right Side Cover

Tighten the bolts with the collars.