2022 Kawasaki VERSYS 650 ABS Throttle Control System
Throttle Control System
Throttle Grip
Throttle Grip Free Play Inspection
- Check that the throttle grip moves smoothly from fully open to close, and the throttle closes quickly and completely by the return spring in all steering positions.
- If the throttle grip does not return properly, have the throttle control system checked by an authorized Kawasaki dealer.
- Check the throttle grip free play by turning back and forth.
A. Throttle Grip
B. Throttle Grip Free Play
- Throttle Grip Free Play
- 2 – 3 mm (0.08 0.12 in.)
- If there is improper play, adjust it.
Throttle Grip Free Play Adjustment
- Loosen the locknut at the throttle grip, and turn the adjuster until the proper amount of throttle grip play is obtained.
- Tighten the locknut.
A. Locknut
B. Adjuster
C. Throttle Cable (Accelerator Cable)
- If the throttle cables cannot be adjusted with the adjuster at the upper end of the throttle cable, further adjustment of the throttle cables should be done by an authorized Kawasaki dealer.
- With the engine idling, turn the handlebars to each side. If handlebar movement changes the idle speed, the throttle cables may be improperly adjusted or incorrectly routed, or they may be damaged. Be sure to correct any of these conditions before idling.
WARNING
Operation with improperly adjusted, incorrectly routed, or damaged cables could result in unsafe riding conditions. Be sure the control cables are adjusted and routed correctly, and are free from damage.