2022 Kawasaki VERSYS 1000 SE LT+ Suspension System
Suspension System
Front Fork
NOTICE
After riding on the normal road, the unpaved road and in the rainy weather, clean off any dirt (grit, mud or insect etc.) that stuck to inner tube before it hardens. If the motorcycle keeps running with the dirt stuck to the inner tube, the oil seal will be damaged and it causes the oil leak.
Spring Preload Adjustment
The adjuster is located at the lower end of left front fork leg.
Standard
5 turns in In from the fully seated position (turned fully counter-clockwise).
- Turn the adjuster clockwise with an Allen wrench to increase spring preload and stiffen the suspension.
- Turn the adjuster counterclockwise to decrease preload and soften the suspension.
NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.
A. Spring Preload Adjuster
Setting Table
Front Fork Spring Preload Setting
This position is the fully seated position (turned fully counterclockwise). In from the fully seated position (turned fully counterclockwise). This adjustment range may not exactly match the number shown in the table due to small tolerance of production.