2022 Kawasaki VERSYS 1000 SE LT+ Fuses
Fuses
Fuses are arranged in the fuse boxes located under the seat and behind the outer middle fairings. The main fuse is located under the seat. If a fuse fails during operation, inspect the electrical system to determine the cause, and then replace it with a new fuse of proper amperage. If the fuse fails repeatedly, there is something wrong with the electrical system. Have the motorcycle checked by an authorized Kawasaki dealer. The main fuse removal should be done by an authorized Kawasaki dealer.
A. Fuse Boxes
B. Main Fuse
A. Fuse Box
To access the fuse boxes behind the outer middle fairings Remove the quick rivets and bolt.
A. Quick Rivets
B. Bolt
- Remove the bolt and washer.
- Remove the bolts.
- Pull the right outer middle fairing outward to clear the projection.
A. Bolt and Washer
B. Bolts
C. Projection
- Disconnect the front right turn signal light lead connector and right cornering light lead connector.
- Remove the right outer middle fairing.
A. Front Right Turn Signal Light Lead Connector
B. Right Cornering Light Lead Connector
C. Right Outer Middle Fairing
- The left outer middle fairing removal is the same as the right outer middle fairing.
- Check the fuses.
- Connect the front right turn signal light lead connector and right cornering light lead connector.
- Insert the bosses into the holes.
- Insert the projection into the grommet.
A. Bosses
B. Holes
C. Projection
D. Grommets
Install the removed parts.
WARNING
Substituting fuses can cause the wiring to overheat, catch fire and/or fail. Do not use any substitute for the standard fuse. Replace the blown fuse with a new one of the correct capacity, as specified on the fuse boxes and main fuse.
A. Normal
B. Failed