2022 Kawasaki VERSYS 1000 SE LT+ Featured Image

2022 Kawasaki VERSYS 1000 SE LT+ Coolant Owners Manual

by
Contents hide
1 2022 Kawasaki VERSYS 1000 SE LT+ Coolant
2 Coolant

2022 Kawasaki CONCOURS 14 ABS LOGO PRODUCT

2022 Kawasaki VERSYS 1000 SE LT+ Coolant

2022 Kawasaki VERSYS 1000 SE LT+ Product Image

Coolant

Coolant Level Inspection

  • Position the motorcycle so that it is perpendicular to the ground.
  • Check the coolant level through the coolant level gauge on the reserve tank located to behind of the right inner middle fairing. The coolant level should be between the F (Full) and L (Low) level lines.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-12

A. F (Full) Level Line
B. L (Low) Level Line
C. Reserve Tank

NOTE

  • Check the level when the engine is cold (room or atmospheric temperature).
  • If the amount of coolant is insufficient, add coolant into the reserve tank.

Coolant Filling

  • Remove the right outer middle fairing (see Fuses section).
  • Remove the quick rivet.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-13

A. Quick Rivet

Remove the bolts and washers.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-14

A. Bolts and Washers

Pull the right inner middle fairing outward to clear the projections and tabs.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-15

A. Projections
B. Tabs

  • Pull the right inner middle fairing outward to clear the projection and tabs.
  • Remove the right inner middle fairing.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-16

A. Projection
B. Tabs
C. Right Inner Middle Fairing

Remove the cap from the reserve tank and add coolant through the filler opening between the F (Full) and L (Low) level lines.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-17

A. Reserve Tank Cap

NOTE
ln an emergency you can add water alone to the coolant reserve tank, however, it must be returned to the correct mixture ratio by the addition of antifreeze concentrate as soon as possible.

NOTICE
If coolant must be added often, or the reserve tank completely runs dry, there is probably leakage in the system. Have the cooling system inspected by your authorized Kawasaki dealer.

  • Install the reserve tank cap.
  • Insert the tabs into the slots.
  • Insert the projection into the grommet

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-18

A. Tabs
B. Slots
C. Projection
D. Grommet

  • Insert the projections into the grommets.
  • Insert the tabs into the slots.

2022-Kawasaki-VERSYS-1000-SE-LT+-fig-19

A. Projections
B. Grommets
C. Tabs
D. Slots

  • Tighten the bolts with washers.
  • Install the quick rivet.
  • Install the right outer middle fairing (see Fuses section).

Coolant Change
Have the coolant changed by an authorized Kawasaki dealer.

Coolant Requirement

WARNING
Coolant-containing corrosion inhibitors for aluminum engines and radiators include harmful chemicals for the human body. Drinking coolant can result in serious injury or death. Use coolant in accordance with the instructions of the manufacturer. Use a permanent type of antifreeze (soft water and ethylene glycol plus corrosion and rust inhibitor chemicals for aluminum engines and radiators) in the cooling system. On the mixture ratio of coolant, choose the suitable one referring to the relation between freezing point and strength directed on the container.

NOTICE
If hard water is used in the system, it causes scale accumulation in the water passages, and considerably reduces the efficiency of the cooling system.

NOTE
A permanent type of antifreeze is installed in the cooling system when shipped. It is mixed at 50% and has a freezing point of—350C (—31 OF).

Leave a Comment