2022 Kawasaki NINJA ZX-6R Left Handlebar Switches Owners Manual

2022 Kawasaki NINJA ZX-6R Left Handlebar Switches

Left Handlebar Switches

• A.Dimmer Switch
• B. Multifunction Button
• C. Turn Signal Switch
• D. Horn Button
• E.Hazard Switch
• F. Passing Button

Dimmer Switch
A high or low beam can be selected with the dimmer switch. High beam… (High beam indicator: see Meter Instruments section) Low beam… )

NOTE

• DO does not allow anything to cover the headlight lens when the headlight is on. If covered, heat can build up in the headlight lens causing lens discoloration or melting, as well as damage to the item covering the lens.

Multifunction Button
The multifunction button is used for setting the meter display, power mode, KTRC mode, and KQS mode.

• Meter setting: Refer to the Display Setting section.
• Power mode setting: Mode section in the HOW TO RIDE THE MOTORCYCLE chapter.
• KTRC setting: Refer to the Kawasaki T Reaction Control (KTRC) section in the HOW TO RIDE THE MOTORCYCLE chapter.
• KQS mode setting: Refer to the KQS section in the HOW TO RIDE THE MOTORCYCLE chapter.

Turn Signal Switch
When the turn signal switch is turned to the left( e l) or right( ), the corresponding turn signal lights and turn signal indicator blinks. To cancel the turn signal, push the switch in.

Horn Button
When the horn button is pushed, the
horn sounds.
Hazard Switch
Push in the hazard switch with the ignition switch in the “ON” position. All the turn signal lights and turn signal indicators will blink.

NOTE

• Be careful not to use the hazard lights for an extended period of time, otherwise, the battery may become totally discharged.

Passing Button
The high beam turns on only while the passing button is pushed.