2022 Kawasaki NINJA ZX-6R ABS KRT Edition Seats Owners Manual

2022 Kawasaki NINJA ZX-6R ABS KRT Edition Seats

Seats

The seats can be removed by in order of the rider’s seat then the passenger’s seat.

Rider’s Seat Removal

• Insert the ignition key into the seat lock.
• Lift the rear part of the rider’s seat upward while turning the key clockwise.
• Remove the rider’s seat rearward.
• Remove the ignition key.

A. Ignition Key
B. Rider’s Seat

Rider’s Seat Installation

• Insert the hook on the front of the rider’s seat into the slot in the frame.
• Insert the latch plate at the rear of the rider’s seat into the latch holes on the frame.
• Push down the rear part of the rider’s seat until the lock clicks.

A. Hook
B. Slot
C. Latch Plate
D. Latch Hole

• Pull up the front and rear ends of the rider’s seat to make sure they are securely locked.

Passenger’s Seat Removal

• Remove the rider’s seat (see Rider’s Seat Removal).
• Lift the front part of the passenger’s seat upward while pulling the seat lock cable forward.
• Remove the passenger’s seat forward.

A. Seat Lock Cable
B. Passenger’s Seat

Passenger’s Seat Installation

• Insert the hooks at the rear of the passenger’s seat under the frame.
• Insert the latch plate at the front part of the passenger’s seat into the latch hole of the frame.
• Push down the front part of the pas- senger’s seat until the lock clicks.

A. Hooks
B. Frame
C. Latch Plate
D. Latch Hole

• Pull up the front and rear ends of the passenger seat to make sure they are securely locked.
• Install the rider’s seat (see Rider’s Seat Installation).