2022 Kawasaki NINJA ZX-6R ABS KRT Edition Seats
Seats
The seats can be removed by in order of the rider’s seat then the passenger’s seat.
Rider’s Seat Removal
- Insert the ignition key into the seat lock.
- Lift the rear part of the rider’s seat upward while turning the key clockwise.
- Remove the rider’s seat rearward.
- Remove the ignition key.
A. Ignition Key
B. Rider’s Seat
Rider’s Seat Installation
- Insert the hook on the front of the rider’s seat into the slot in the frame.
- Insert the latch plate at the rear of the rider’s seat into the latch holes on the frame.
- Push down the rear part of the rider’s seat until the lock clicks.
A. Hook
B. Slot
C. Latch Plate
D. Latch Hole
- Pull up the front and rear ends of the rider’s seat to make sure they are securely locked.
Passenger’s Seat Removal
- Remove the rider’s seat (see Rider’s Seat Removal).
- Lift the front part of the passenger’s seat upward while pulling the seat lock cable forward.
- Remove the passenger’s seat forward.
A. Seat Lock Cable
B. Passenger’s Seat
Passenger’s Seat Installation
- Insert the hooks at the rear of the passenger’s seat under the frame.
- Insert the latch plate at the front part of the passenger’s seat into the latch hole of the frame.
- Push down the front part of the pas- senger’s seat until the lock clicks.
A. Hooks
B. Frame
C. Latch Plate
D. Latch Hole
- Pull up the front and rear ends of the passenger seat to make sure they are securely locked.
- Install the rider’s seat (see Rider’s Seat Installation).