2022 Kawasaki NINJA ZX-14R Power Mode
Power Mode
The Power mode determines the engine power output characteristics and has two settings. The Power mode and the KTRC can be set separately. By combining each setting, the rider can get various riding feelings. For further details on the combined use of the Power mode and the KTRC, refer to KTRC and Power Mode Combination section.
Mode F (Full Power):
The highest engine power output is achieved. The rider can feel the full throttle response of the engine.
Mode L (Low Power):
About 80% of the highest engine power output is achieved. The throttle response is milder than F mode.
Power mode setting
- Close the throttle grip completely.
- Push the “SEL” button to select the
- Power mode indicator. When the Power mode indicator is selected, it blinks.
A. Upper Button
B. “SEL” Button
C. Lower Button
Push the upper or lower button to select the Power mode. Upper Button: Mode F (Full Power) Lower Button: Mode L (Low Power)
NOTE
- When changing the mode, stop the motorcycle.
- When 30 seconds have passed or the throttle is opened after the Power mode indicator starts blinking, it stops blinking and the selected mode is fixed.
- The mode can be changed only when the throttle grip is closed completely.
- The display/mode is switched when the button is released. When the button is held for more than two seconds, the switching function does not work.
- Check the Power mode indicator to make sure that the mode has been changed.
A. Power Mode Indicator
NOTE
The Power mode setting is maintained if the ignition switch is turned to “OFF” position, or if the battery is disconnected.