2022 Kawasaki NINJA ZX-14R Left Handlebar Switches Owners Manual

2022 Kawasaki NINJA ZX-14R Left Handlebar Switches

Left Handlebar Switches

A. Dimmer Switch
B. Turn Signal Switch
C. Horn Button
D. Multifunction Button
E. Passing Button
F. Hazard Switch

Dimmer Switch
High or low beam can be selected with the dimmer switch. High beam… (High beam indicator: see Meter Instruments section) Low beam… (Double lights go on)

NOTE
DO not allow anything to cover the headlight lens when the headlight is on. If covered, heat can build up in the headlight lens causing lens discoloration or melting, as well as damage to the item covering the lens.

Turn Signal Switch
When the turn signal switch is turned to the left( 1) or right( ), the corresponding turn signal lights and turn signal indicator blinks. To cancel the turn signal, push the switch in.

Horn Button
When the horn button is pushed, the horn sounds.

Multifunction Button
The multifunction button is used for setting the meter and KTRC/Power mode.

• Meter setting: Refer to the Display Setting section.
• KTRC setting: Refer to the Kawasaki Traction Control (KTRC) section in the HOW TO RIDE THE MOTORCYCLE chapter.
• Power mode setting: Refer to the Power Mode section in the HOW TO RIDE THE MOTORCYCLE chapter.

Passing Button
The high beam turns on only while the passing button is pushed.

Hazard Switch
Push in the hazard switch with the ignition switch in the “ON” position. All the turn signal lights and tum signal indicators will blink.

NOTE
Be careful not to use the hazard lights for an extended period of time,B Bothetwise the battery may become totally discharged.