2022 Kawasaki NINJA ZX-10R Suspension System Owners Manual

2022 Kawasaki NINJA ZX-10R Suspension System

Suspension System

Front Fork

WARNING
Improper fork leg adjustment can cause poor handling and loss of stability, which could lead to an accident. Always adjust the fork legs on the left and right side to the same setting.

NOTICE
After riding on the normal road, the unpaved road and in the rainy weather, clean off any dirt (grit, mud or insect etc.) that stuck to inner tube before it hardens. If the motorcycle keeps running with the dirt stuck to the inner tube, the oil seal will be damaged and it causes the oil leak.

Spring Preload Adjustment
The adjuster is located at the top of each front fork leg.

Standard
7 turns in In from the fully seated position (turned fully counterclockwise).

• Turn the adjuster clockwise to increase spring preload and stiffen the suspension.
• Turn the adjuster counterclockwise to decrease preload and soften the suspension.

NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.

NOTE
The spring preload adjuster can be turned with the allen wrench or suitable tool.

A. Spring Preload Adjuster

Rebound Damping Force Adjustment
The adjuster is located at the lower end of each front fork leg.

Standard
2 turns out Out from the fully seated position (turned fully clockwise).

• Turn the adjuster clockwise with a flat tip screwdriver to increase damping force.
• Turn the adjuster counterclockwise to decrease damping force.

NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.

A. Rebound Damping Force Adjuster

Compression Damping Force Adjustment
The adjuster is located at the lower end of each front fork leg.

Standard
2 3/4 turns out Out from the fully seated position (turned fully clockwise).

• Turn the adjuster clockwise with a fiat tip screwdriver to increase damping force.
• Turn the adjuster counterclockwise to decrease damping force.

NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.

A. Compression Damping Force Adjuster

Rear Shock Absorber

Spring Preload Adjustment
The spring adjusting nut on the rear shock absorber can be adjusted. If the spring action feels too soft or too stiff, have it adjusted by an authorized Kawasaki dealer.

Rebound Damping Force Adjustment
The adjuster is located at the lower end of the rear shock absorber

Standard
2 3/4 turns out Out from the fully seated position (tumed fully clockwise).

• Turn the adjuster clockwise with a flat tip screwdriver to increase damping force.
• Turn the adjuster counterclockwise to decrease damping force.

NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.

A. Rebound Damping Force Adjuster

Compression Damping Force Adjustment
The adjuster is located at the lower end of the rear shock absorber.

Standard
1 1/2 turn out Out from the fully seated position (turned fully clockwise).

• Turn the adjuster clockwise with a fiat tip screwdriver to increase damping force.
• Turn the adjuster counterclockwise to decrease damping force.

NOTICE
Do not turn the adjuster beyond the fully seated position or the adjusting mechanism may be damaged.

A. Compression Damping Force Adjuster

Setting Tables

Front Fork Spring Preload Setting

This position is the fully seated position (turned fully counterclockwise). In from the fully seated position (turned fully counterclockwise). This adjustment range may not exactly match the number shown in the table due to small tolerance of production.

Front Fork Damping Force Settings

This position is the fully seated position (turned fully clockwise). Out from the fully seated position (turned fully clockwise). This adjustment range may not exactly match the number shown in the table due to small tolerance of production.