2022 Kawasaki NINJA ZX-10R Specifications Owners Manual

2022 Kawasaki NINJA ZX-10R Specifications

Specifications

PERFORMANCE

Minimum Turning Radius 3.4 m (11.2 ft)

DIMENSIONS

• Overall Length2 085 mm (82.09 in.)
• Overall Width 750 mm (29.5 in.)
• Overall Height 1 185 mm (46.65 in.)
• Wheelbase 1 450 mm (57.09 in.)
• Road Clearance 135 mm (5.31 in.)
• Curb Mass:
  • ZX1002L207 kg (456 lb)
  • ZX1002M 205 kg (452 lb)

ENGINE

• Type DOHC, 4-cylinder, 4-stroke, liquid-cooled
• Displacement 998 (60.9 cu in.)
• Bore x Stroke 76.0 x 55.0 mm (2.99 x 2.17 in.)
• Compression Ratio 13.0: 1
• Starting System Electric starter
• Cylinder Numbering Method Left to right, 1-2-3-4
• Firing Order 1_2-4-3
• Fuel System Fl (Fuel Injection)
• Ignition System Battery and coil (transistorized ignition)
• Ignition Timing (Electronically advanced) 100 BTDC 100 rimin (rpm) 400 BTDC OOO r/min (rpm)
• Spark Plug:
  • Type NGK SILMAR9B9
  • Gap 0.8 0.9 mm (0.031 0.035 in.)
• Lubrication System Forced lubrication (wet sump)
• Engine Oil:
  • Type API SG, SH, SJ, SL or SM with JASO MA, MAI or MA2
  • Viscosity SAE low-40
  • Capacity 4.0 L (4.2 US qt)
• Coolant Capacity 2.2 L (2.3 US qt)

TRANSMISSION

• Transmission Type 6-speed, constant mesh, return shift
• Clutch Type Wet, multi-disc
• Driving System Chain drive
• Primary Reduction Ratio 1.681 (79/47)
• Final Reduction Ratio 2.412 (41/17)
• Overall Drive Ratio 5.288 (Top gear)
  • 1st 2.600 (39/15)
  • 2nd 2.158 (41/19)
  • 3rd 1.882 (32/17)
  • 4th 1.650 (33/20)
  • 5th 1.476 (31/21)
  • 6th 1.304 (30/23)

FRAME

• Caster 25.00
• Trail 105 mm (4.13 in.)
• Tire Size:
  • Front 120/70ZR17 WC (58W)
  • Rear 190/55ZR17 WC (75W)
• Rim Size:
  • Front 17M/C x MT3.50
  • Rear 17M/C x MT6.OO
• Fuel Tank Capacity 17 L (4.5 US gal)
• Brake Fluid:
  • Front DOT4
  • Rear DOT4

ELECTRICAL EQUIPMENT

• Battery 12 V 8.6 Ah (10 HR)
• Headlight:
  • High Beam LED
  • Low Beam LED
• City Light LED
• Brake/TaiI Light LED
• Turn Signal Light:
  • Front LED
  • Rear LED
• License Plate Light LED

Even if any one element of LED (Light Emitting Diode) light does not go on, consult with an authorized Kawasaki dealer.

Brake/TaiI Light
The brake/tail light goes on as below

A. When the ignition switch is turned on.
B. When the brakes are applied.

When the ignition switch is turned on, some LED does not go on, however, it is normal. Specifications are subject to change without notice.