2022 Kawasaki NINJA ZX-10R Kawasaki Launch Control Mode (KLCM)
Kawasaki Launch Control Mode (KLCM)
KLCM is a rider assist system which optimizes the starting acceleration by electronically controlling the engine output. KLCM can be used in closed course. Do not use KLCM during everyday riding.
KLCM Setting
Change the riding mode. Refer to the Integrated Riding Modes section.
NOTE
KLCM cannot be used in the riding mode shown in the table below.
Push the upper MODE button and the SELECT button simultaneously and hold them in until KLCM ON message blinks three times.
A. upper MODE Button
B. SELECT Button
C. KLCM ON Message
NOTE
KLCM can be canceled by operating the above procedure again.
After setting KLCM, shifting into first gear with the motorcycle stopped will activate KLCM. Even if you turn the throttle grip fully, the engine speed limiter keeps the engine speed shown below.
When starting, keep the throttle grip turned fully and engage the clutch gradually. After the clutch is engaged, the system will control the engine torque to obtain maximum acceleration. KLCM is released when shifted into third gear or when the motorcycle speed reaches 150 km/h (93 mph). Successive use of KLCM is restricted to protect the engine.
When KLCM is unable to use, the following warning message is displayed.
A. KLCM OFF Warning Message
WARNING
KLCM is for experienced riders .Be sure to understand its characteristics completely before use. Never engage the clutch abruptly or you may lose control and crash, plus sudden high power transmission may damage the engine.
KLCM Modes
KLCM determines the acceleration level from three modes.