2022 Kawasaki NINJA ZX-10R Electronic Cruise Control System Owners Manual

Contents hide

1 2022 Kawasaki NINJA ZX-10R Electronic Cruise Control System

2022 Kawasaki NINJA ZX-10R Electronic Cruise Control System

Electronic Cruise Control System

Cruise control lets the motorcycle maintain a speed of about 32 km/h (20 mph) or more without operating the throttle.

NOTE

The system does not open at excessively low rpm or when in neutral, 1st or 2nd gear.
At 3rd gear, the cruise control can be used when the vehicle speed exceeds about 32 km/h (20 mph).
At 6th gear, the maximum settable speed is 136 km/h (85 mph). How- ever, on public roads, keep maxi- mum speed under the posted speed limits.
For engine protection, the settable speed varies depending on the gear position.

WARNING
Cruise control can be dangerous where you cannot drive safely as a steady speed. Do not use cruise control when riding in heavy or varying traffic, on hills or when negotiating winding roads as this will cause an accident resulting in serious injury or death.

To set the cruise control
Push the cruise control button ( ) on the left handlebar. The system activates and the cruise control indicator goes on.

A. Cruise Control Button( )
B. Cruise Control Indicator

Push the SET/- button at the desired speed. The system starts the cruise control at the current vehicle speed and the “SET” mark appears on the display screen.

A. SET/- Button
B. “SET” Mark

To adjust the set speed

To increase the set speed, push the RES/+ button and hold it until the vehicle reaches the desired speed.
To decrease the set speed, push the SET/- button and hold it until the vehicle reaches the desired speed

A. RESI+ Button
B. SET/- Button

NOTE

When the RES/+ button is released rapidly, the set speed increases 1.5 km/h (1 mph) from the current speed.
The system may not accept the repeatedly input of the RES/+ button to prevent an excessive increase in the set speed by misoperation.
When the SET/- button is released rapidly, the set speed decreases 1.5 km/h (1 mph) from the current speed.
When pushing the RES/+ or SET/- button, the arrow mark appears on the display screen.

A. Arrow Mark

NOTE
If you want to accelerate temporarily, accelerate with normal throttle application. In this case, to return to the set speed, release the throttle without using the front and rear brakes.

To cancel the set speed

The set speed is disengaged temporarily under the following conditions:
When pulling the brake lever.
When stepping on the brake pedal.
When pulling the clutch lever.
When shifting gears.
When closing the throttle grip beyond the closed position.
The cruise control is stopped under the following conditions and the set speed is erased and it cannot be re- sumed:
When the engine speed drops below about 2 000 r/min (rpm).
When the vehicle speed drops 15 km / h (9 mph) from the set speed.
When pushing the cruise control button
The cruise control set indicator dis- appears.

To resume the set speed

Push the RESI+ button.
The set speed appears on the display screen until the set speed is reached.

A. Set Speed

NOTE

When the RES/+ or SET/- button is pushed during resume set speed, the set speed is renewed to the current vehicle speed.
When the vehicle speed reaches to the set speed, the cruise control set indicator appears again.

To deactivate the cruise control