2022 Kawasaki NINJA H2 Left Handlebar Switches Owners Manual

2022 Kawasaki NINJA H2 Left Handlebar Switches

Left Handlebar Switches

A. Dimmer/Passing Button
B. Hazard Button
C. Horn Button
D. Upper Button
E. Turn Signal Switch
F. Lower Button

Dimmer/Passing Button
High or low beam can be selected with the dimmer/passing button like a trigger To use the high beam, push the but- ton out. To turn off the high beam, pull the button. To use the high beam for the passing, pull the button. The high beam turns on only while the button is pulled.

A. Push: Dimmer Function (Turning on high beam)
B. Pull: Passing Function/Dimmer Function (Turning off high beam)

High beam (High beam indicator: see Meter Instruments section) Low beam.. Passing…

Turn Signal Switch
When the turn signal switch is turned to the left ( )or right ( )the cor- responding turn signal lights and turn signal indicator blinks. To cancel the turn signal, push the switch in.

Horn Button
When the horn button is pushed, the horn sounds.

Upper and Lower Button
The upper and lower buttons are used for setting the meter. Refer to the Display Select section.

Hazard Button
Push in the hazard button with the ignition switch in the “ON” position. All turn signal lights and turn signal indica- tors will blink.

NOTE
Be careful not to use the hazard lights for an extended period of time, otherwise the battery may become totally discharged.