2022 Kawasaki NINJA H2 R Hip Support Owners Manual

2022 Kawasaki NINJA H2 R Hip Support

Hip Support

This motorcycle is equipped with movable hip support. The hip support position can be selected from two positions. The standard position is forward.
Hip Support Position Adjustment

• Remove the seat (see Seat Removal).
• Remove the inner hip support cover bolts.

A. Inner Hip Support Cover Bolts

• Remove the outer hip support cover bolts and washers.

A. Outer Hip Support Cover Bolts and Washers

• Pull the rear part of the cover outward to clear the projection.

A. Projection

• Pull the front part of the cover downward to clear the tab from the slot.
• Remove the hip support cover.

A. Tab and Slot
B. Hip Support Cover

• Remove the hip support assembly bolts and the washer.
• Remove the hip support assembly.

A. Hip Support Assembly Bolt (M5) and Washer
B. Hip Support Assembly Bolts (M6)
C. Hip Support Assembly

• Install the hip support assembly to the suitable position.

A. Front Position
B. Rear Position

• Tighten the hip support assembly bolts with the washer to the specified torque.

Tightening Torque

• Hip Support Assembly Bolts (M6)
  • 8.0 N.m (0.82 kgfrm, 71 in.lb)
• Hip Support Assembly Bolt (M5)
  • 3.0 N.m (0.31 kgfrm, 27 in.lb)

NOTE

• lf a torque wrench is not available, this item should be serviced by an authorized Kawasaki dealer.
• Insert the tab into the slot.

A. Tab
B. Slot

• Insert the projection into the grommet.

A. Projection
B. Grommet

• Tighten the hip support cover bolts with the washers. Install the seat (see Seat Installation).