2022 Kawasaki NINJA H2 R Brakes Owners Manual

Kawasaki logo

2022 Kawasaki NINJA H2 R Brakes

2022-Kawasaki-NINJA-H2-R-product

Brakes

If you feel there is something wrong when applying the brakes, have the brake system checked by an authorized Kawasaki dealer immediately.

WARNING

Air in the brake lines diminishes braking performance and can cause an accident resulting in injury or death. If the brake lever or pedal feels mushy when it is applied, there might be air in the brake lines or the brake may be defective. Has the brake been checked immediately by an authorized Kawasaki dealer?

Brake Fluid Level Inspection

  • With the brake fluid reservoirs held horizontally, the brake fluid level must be kept between the upper and lower level lines.

2022-Kawasaki-NINJA-H2-R-fig-175A. Front Brake Fluid Reservoir
B. Upper-Level Line
C. Lower Level Line

2022-Kawasaki-NINJA-H2-R-fig-176A. Rear Brake Fluid Reservoir
B. Upper-Level Line
C. Lower Level Line

  • If the fluid level is lower than the lower level line it may indicate that the fluid is leaking. In this case, have the brake system inspected by an authorized Kawasaki dealer.

Brake Pad Wear Inspection

Inspect the brakes for wear. For the front disc brake caliper, if the thickness of either pad lining is less than I mm (0.04 in.), replace both pads in the caliper as a set. Pad replacement should be done by an authorized Kawasaki dealer.

WARNING

Replace the brake pads before the linings are completely worn away. If the brake pad linings wear out completely during riding, it will reduce brake performance and may cause loss of control and a crash resulting in serious injury or death.

2022-Kawasaki-NINJA-H2-R-fig-177A. Front Brake Pads
B. Pad Lining
C. 1 mm (0.04 in.)
For the rear disc brake caliper, if the thickness of either pad lining including the backplate is less than 4.5 mm (0.18 in.), replace both pads in the caliper as a set. Pad replacement should be done by an authorized Kawasaki dealer.

2022-Kawasaki-NINJA-H2-R-fig-177A. Rear Brake Pads
B. Pad Lining
C. Back Plate
D. 4.5 mm (0.18 in.)

Leave a Comment