2022 Kawasaki NINJA 650 ABS Specifications
Specifications
PERFORMANCE
Minimum Turning Radius: 2.8 m (9.2 ft)
DIMENSIONS
- Overall Length: 2 055 mm (80.91 in.)
- Overall Width: 740 mm (29.1 in.)
- Overall Height: 1 145 mm (45.08 in.)
- Wheelbase: 1 410 mm (55.51 in.)
- Road Clearance: 130 mm (5.12 in.)
- Curb Mass:
- EX650M
- 192 kg (423 lb)
(CAL) 193 kg (426 lb)
- 192 kg (423 lb)
- EX650N
- 190 kg (419 lb)
(CAL) 191 kg (421 lb)
- 190 kg (419 lb)
- EX650M
ENGINE
- Type: DOHC, 2-cylinder, 4-stroke, liquid-cooled
- Displacement: 649 CMA (39.6 cu in.)
- Bore x Stroke: 83.0 x 60.0 mm (3.27 x 2.36 in.)
- Compression Ratio: 10.8:1
- Starting System: Electric starter
- Cylinder Numbering Method: Left to right, 1-2
- Firing Order: 1-2
- Fuel System: Fl (Fuel Injection)
- Ignition System: Battery and coil (transistorized ignition)
- Ignition Timing: 100 BTDC 300 min (rpm) 470 BTDC OOO
- (Electronically advanced): r/min (rpm)
- Spark Plug:
- Type
- NGK CR9ElA-9
- Gap
- 0.8 0.9 mm (0.031 0.035 in.)
- Type
- Lubrication System Forced lubrication (Semi-dry sump)
- Engine Oil:
- Type
- API SG, SH, SJ, SL, or SM with JASO MA, MAI or MA2
- Viscosity
- SAE 10W-40
- Capacity
- 2.3 L (2.4 US qt)
- Type
- Coolant Capacity: 1.2 L (1.3 US qt)
TRANSMISSION
- Transmission Type: 6-speed, constant mesh, return shift
- Clutch Type: Wet, multi-disc
- Driving System: Chain drive
- Primary Reduction Ratio: 2.095 (88/42)
- Final Reduction Ratio: 3.067 (46/15)
- Overall Drive Ratio: 5.473 (Top gear)
- Gear Ratio:
- 1st
- 2.438 (39/16)
- 2nd
- 1.714 (36/21)
- 3rd
- 1.333 (32/24)
- 4th
- 1.111 (30/27)
- 5th
- 0.966 (28/29)
- 6th
- 0.852 (23/27)
- 1st
FRAME
- Caster: 24.00
- Trail: 100 mm (3.94 in.)
- Tire Size:
- Front
- 120/70ZR17 M/C (58W)
- Rear
- 160/60ZR17 WC (69W)
- Front
- Rim Size:
- Front
- 17M/c x MT3.50
- Rear
- 17M/C x MT4.50
- Front
- Fuel Tank Capacity:
- 15 L (4.0 US gal)
- Brake Fluid:
- Front
- DOT4
- Rear
- DOT4
- Front
ELECTRICAL EQUIPMENT
- Battery: 12 V 8.6 Ah (10 HR)
- Headlight:
- High Beam
- LED
- Low Beam
- LED
- High Beam
- City Light: LED
- Brake/tail Light: LED
- Turn Signal Light:
- Front
- 12 V 10 W (RY10W)
- Rear
- 12 V 10 W (WY10W)
- Front
- License Plate Light: 12 V 5 W (W5W)
- CAL: California model
Even if any one element of LED (Light Emitting Diode) light does not go on, consult with an authorized Kawasaki dealer.
Brake/Tail Light
The brake/tail light goes on as below:
- A.When the Ignition switch IS turned on.
- B. When the brakes are applied.
When the ignition switch is turned on, some LED does not go on, however, it is normal.
Specifications are subject to change without notice.