2022 Kawasaki NINJA 400 Air Cleaner
Air Cleaner
This motorcycle’s air cleaner element consists of a wet paper filter. Replacement of the air cleaner element shouldbe done by an authorized Kawasaki dealer.
Oil Draining
- Remove the rider’s seat (see Seats section in the GENERAL INFORMA- TION chapter).
- Remove the bolt and washer.
- Remove the bolt.
- Pull the left side cover outward to clear the projections and tabs.
- Remove the left side cover.
A. Bolt and Washer
B. Bolt
C. Projections
D. Tabs
E. Left Side Cover
Remove the fuse box from the bracket.
A. Fuse Box
Inspect the transparent drain cap located the left lower end of the air cleaner housing to see if any oil has run down.
A. Transparent Drain Cap
B. Clamp
If there is any oil in the drain cap, remove the clamp and drain cap, and drain the oil.
WARNING
Oil on tires will make them slippery and can cause an accident and injury. Be sure to install the drain cap to the air cleaner housing after draining. Install the fuse box to the bracket.
A. Fuse Box
- Insert the tabs of the left side cover into the slots.
- Insert the projections of the left side cover into the grommets.
A. Tabs
B. Slots
C. Projections
D. Grommets
E. Left Side Cover
- Tighten the bolt.
- Tighten the bolt with washer.
A. Bolt
B. Bolt and Washer
Install the removed parts.