2022 Kawasaki NINJA 400 ABS Seats Owners Manual

2022 Kawasaki NINJA 400 ABS Seats

Seats

The seats can be removed by in order of the passenger’s seat then the rider’s seat.

Passenger’s Seat Removal

• Insert the ignition key into the seat lock.
• Lift the front part of the passenger’s seat upward while turning the key clockwise.
• Remove the passenger’s seat forward.
• Remove the ignition key.

A. Ignition Key
B. Passenger’s Seat

Passenger’s Seat Installation

• Insert the hooks at the rear of the passenger’s seat into the slots of the frame.
• Insert the seat lock projection at the front of the passenger’s seat into the latch hole.
• Push down the front part of the passenger’s seat until the lock clicks.

A. Hooks
B. Slots
C. Seat Lock Projection
D. Latch Hole

• Pull up the front and rear ends of the passenger seat to make sure they are securely locked.

Rider’s Seat Removal

• Remove the passenger seat (see Passenger’s Seat Removal).
• Lift the rear part of the rider’s seat upward while pulling the seat lock cable backward.
• Remove the rider’s seat backward.

A. Seat Lock Cable
B. Rider’s Seat

Rider’s Seat Installation

• Insert the hooks at the front of the rider’s seat under the fuel tank bracket.
• Insert the seat latch at the rear part of the rider’s seat into the latch hole of the frame.
• Push down the rear part of the rider’s seat until the lock clicks.

A. Hooks
B. Fuel Tank Bracket
C. Seat Latch
D. Latch Hole

• Pull up the front and rear ends of the rider’s seat to make sure they are securely locked.
• Install the passenger seat (see Passenger’s Seat Installation).