2022 Kawasaki NINJA 400 ABS Seats
Seats
The seats can be removed by in order of the passenger’s seat then the rider’s seat.
Passenger’s Seat Removal
- Insert the ignition key into the seat lock.
- Lift the front part of the passenger’s seat upward while turning the key clockwise.
- Remove the passenger’s seat forward.
- Remove the ignition key.
A. Ignition Key
B. Passenger’s Seat
Passenger’s Seat Installation
- Insert the hooks at the rear of the passenger’s seat into the slots of the frame.
- Insert the seat lock projection at the front of the passenger’s seat into the latch hole.
- Push down the front part of the passenger’s seat until the lock clicks.
A. Hooks
B. Slots
C. Seat Lock Projection
D. Latch Hole
- Pull up the front and rear ends of the passenger seat to make sure they are securely locked.
Rider’s Seat Removal
- Remove the passenger seat (see Passenger’s Seat Removal).
- Lift the rear part of the rider’s seat upward while pulling the seat lock cable backward.
- Remove the rider’s seat backward.
A. Seat Lock Cable
B. Rider’s Seat
Rider’s Seat Installation
- Insert the hooks at the front of the rider’s seat under the fuel tank bracket.
- Insert the seat latch at the rear part of the rider’s seat into the latch hole of the frame.
- Push down the rear part of the rider’s seat until the lock clicks.
A. Hooks
B. Fuel Tank Bracket
C. Seat Latch
D. Latch Hole
- Pull up the front and rear ends of the rider’s seat to make sure they are securely locked.
- Install the passenger seat (see Passenger’s Seat Installation).