2022 Kawasaki KX65 Lubrication
Lubrication
Lubricate the areas shown in the illustrations of this section, with either motor oil or regular grease, in accordance with the Periodic Maintenance Chart and whenever the vehicle has been operated under wet or rainy conditions, especially after using a high-pressure spray washer. Before lubricating apart, clean off any rust with rust remover and wipe off any grease, oil, dirt, or grime.
General Lubrication
Apply motor oil to the following pivots:
- Clutch lever
- Front brake lever
- Rear brake pedal
- Rear brake rod joints
- Kick pedal
Apply an aerosol cable lubricant with a pressure lubricator on all cables:
- Clutch cable
- Throttle cable
Cable Lubrication
Apply grease to the following points:
- The upper end of the clutch cable
- The upper end of a throttle cable
A. Grease.
Drive Chain Lubrication
Lubrication is necessary after riding through rain or on wet roads, or any time that the chain appears dry.
Use a lubricant for drive chains. If the chain is especially dirty, clean it using a cleaner for drive chains following the instructions supplied by the chain cleaner manufacturer.
- Apply lubricant to the sides of the rollers so that it will penetrate to the rollers and bushings. Wipe off any excess lubricant.
- Wipe off any lubricant that gets on the tire surface.