2022 Kawasaki KX65 Exhaust system Owners Manual

2022 Kawasaki KX65 Exhaust system

Exhaust System

The exhaust system, in particular the muffler, is designed to reduce exhaust noise and conduct the exhaust gases away from the rider while minimizing power loss. If carbon has built up inside the muffler, exhaust efficiency is reduced, causing engine per- formance to drop. If the muffler is badly damaged, dented, cracked or rusted, replace it. Replace the silencer packing if the exhaust noise becomes too loud or engine per- formance drops.

Silencer Packing Replacement

• Remove the right side cover.
• Remove the muffler bolts and pull the muffler off toward the rear.

A. Muffler
B. Bolts

Remove the inner pipe bolts of the front end and rear end of the mufler, and pull out the tail pipe.

A. Bolts
B. Muffler Pipe

A. Bolts

Pull off the old silencer wool, and install the new one

A. Silencer Wool

• Install the tail pipe into the muffler.
• Apply silicone sealant to the front end and rear end of the muffle
• Tighten the bolts applied the non-permanent locking agent.
• Install the muffler and right side cover.