2022 Kawasaki KLX300R Adjustable Ergonomic Owners Manual

2022 Kawasaki KLX300R Adjustable Ergonomic

Adjustable Ergonomic

To suit various riding positions, the handlebar holder position can be changed and the handlebar can be adjusted by turning the handlebar holders around (180°).

Handlebar Position Adjustment

• Unlock the clamp of the number plate.
• Remove the number plate mounting bolt.
• Pull up the number plate to clear the projections and remove the number plate.

A. Clamp
B. Bolt
C. Projections
D. Number Plate

• Remove the handlebar clamp bolts and clamp.
• Check the handlebar for damage or cracks.
• Pull up the handlebar assembly and move it aside.

A. Handlebar Clamp Bolts
B. Handlebar Clamp
C. Handlebars

Remove the handlebar holder nuts, washers, and handlebar holders.

A. Handlebar Holders
B. Washer
C. Handlebar Holder Nuts

Select the handlebar position to suit the rider’s preference.

Standard position in combination

• Install the handlebar holders into the steering stem head with proper settings.
• Replace the handlebar holder nuts with new ones.
• Install the washers and the handlebar holder nuts loosely.
• Put the handlebar on the handlebar holders.
• Install the handlebar clamp with its chamfer side-facing rear.
• Hand tighten the handlebar clamp bolts.
• Tighten the handlebar holder nuts to the specified torque

Tightening Torque
Handlebar Holder Nuts: 34 Nm (3.5 kgfm, 25 ft:lb)

A. Handlebar Holders
B. Washers
C. Handlebar Holder Nuts
D. Handlebar
E. Handlebar Clamp
F. Chamfers
G. Handlebar Clamp Bolts

• Position the handlebar so that its punch mark with the edge of the left handlebar holder as shown.
• Tighten the front handlebar clamp bolts first then the rear ones with the specified torque.

Tightening Torque _
Handlebar Clamp Bolts: 25 Nm (2.5 kgfm, 18 ft:lb)

A. Punch Mark
B. Handlebar Clamp Bolts

• Check the front brake for the proper brake effect, or no brake drag.
• Reinstall the removed parts.