2022 Kawasaki KLX300 / KLX300SM Coolant Owner’s Manual

2022 Kawasaki KLX300/KLX300SM Coolant

Coolant

Coolant Level Inspection

• Position the motorcycle so that it is perpendicular to the ground.
• Check the coolant level through the coolant level gauge on the reserve tank located under the left side cover.The coolant level should be between the F (Full) and L (Low) level lines.
  
• F (Full) Level Line
• L (Low) Level Line
• Reserve Tank
• NOTE
  • Check the level when the engine is cold (room or atmospheric temperature). If the amount of coolant is insuffiicent, add coolant into the reserve tank.

Coolant Filling

• Remove the left side cover (see Seat section in the GENERAL INFORMA- TION chapter).
• Remove the cap from the reserve tank and add coolant through the filler opening between the F (Full) and L (Low) level lines.
  
• Reserve Tank Cap

NOTE

• ln, an emergency you can add water alone to the coolant reserve tank, however, it must be returned to the correct mixture ratio by the addition of antifreeze concentrate as soon as possible.

NOTICE
If coolant must be added of ten, or the reserve tank completely runs dry, there is probably leakage in the system. Have the cooling system inspected by your authorized Kawasaki dealer.

Coolant Change

Has the coolant been changed by an authorized Kawasaki dealer?

Coolant Requirement

WARNING
Coolant-containing corrosion in inhibitors for aluminum engines and radiators include harmful chemicals for the human body. Drinking coolant can result in serious injury or death. Use coolant in accordance with the instructions of the manufacturer. Use a permanent type of antifreeze (soft water and ethylene glycol plus corrosion and rust inhibitor chemicals for aluminum engines and radiators) in the cooling system. On the mixture ratio of coolant, choose the suitable one referring to the relation between freezing point and strength directed on the container.

NOTICE
If hard water is used in the system, it causes scale accumulation in the water passages and considerably reduces the efficiency of the cooling system.

NOTE

• • A permanent type of antifreeze is installed in the cooling system when shipped. It is mixed at 50% and has a freezing point of -35°C (-31°F).