2022 Kawasaki KLX230 SE Brake Light Switches Owner’s Manual

2022 Kawasaki KLX230 SE Brake Light Switches

Brake Light Switches

Brake Light Switch Inspection

• Turn the ignition switch on.
• The brake light should go on when the front brake is applied.
• If it does not, ask your authorized Kawasaki dealer to inspect the front brake light switch.
• Check the operation of the rear brake light switch by depressing the brake pedal. The brake light should go on after the proper pedal travel.
  
• Brake Pedal
• 10 mm (0.39 in.)
• If the light does not come on, adjust the rear brake light switch.

Brake Pedal Travel

• • 10 mm (0.39 in.)

Brake Light Switch Adjustment

To adjust the rear brake light switch, move the switch up or down by turning the adjusting nut.

• Rear Brake Light Switch
• Adjusting Nut
• Lights sooner
• Lights later

NOTICE
To avoid damaging the electrical connections inside the switch, be sure that the switch body does not turn during adjustment.