2022 Kawasaki KLX110R L Handlebar Owner’s Manual

2022 Kawasaki KLX110R L Handlebar

Handlebar

To keep the handlebar properly secured in place,
it is necessary to install the handlebar clamps correctly.

• Mount the handlebar clamps so that the arrows on the clamp face the front.
• Align the gap at the rear with the punch mark on the handlebar.

A. Handlebar Clamps
B. Arrow Marks
C. Punch Mark
D. Gap

• Tighten the handlebar clamp bolts, front first, then rear. If the handlebar clamps are correctly in- stalled, there will be no gap at the front and an even gap at the rear of the clamps after the bolts are torqued.

A. No Gap
B. Gap
Tightening Torque
Handlebar Clamp Bolts: 25 Nm (2.5 km, 18 ft:lb)

• Check the front brake for the proper brake effect or no brake drag.
• Check the clutch lever (KLX110D Model) and throttle for the proper operations