2022 Kawasaki KLX 230 S/ KLX 230 S ABS Throttle Cotrol System
Throttle Control System
Throttle Grip
Throttle Grip Free Play Inspection
- Check that the throttle grip moves smoothly from fully open to close, and the throttle closes quickly and completely by the return spring in all steering positions.
- If the throttle grip does not return properly, have the throttle control system checked by an authorized Kawasaki dealer.
- Check the throttle grip free play by turning back and forth.
- A. Throttle Grip
- B. Throttle Grip Free Play
Throttle Grip Free Play- 2-3 mm (0.08 0.12 in.)
- If there is improper play, adjust it.
Throttle Grip Free Play Adjustment
- Loosen the locknuts at the upper end of the throttle cables.
- Turn both throttle cable adjusters to give the throttle grip plenty of play.
- Turn the decelerator cable adjuster until there is no play when the throttle grip is completely closed.
- Tighten the locknut.
- Turn the accelerator cable adjuster until 2 3 mm (0.08 0.12 in.) of throttle grip play is obtained.
- Tighten the locknut.
- Locknuts
- Decelerator Cable Adjuster
- Accelerator Cable Adjuster
- If the throttle cables cannot be adjusted with the adjuster at the upper end of the throttle cable, further ad- adjustment of the throttle cables should be done by an authorized Kawasaki dealer.
- With the engine idling, turn the handlebars to each side. If handlebars movement changes the idle speed, the throttle cables may be improperly adjusted or incorrectly routed, or they may be damaged. Be sure to correct any of these conditions before idling.
WARNING
Operation with improper adjusted, incorrectly routed, or damaged cables could result in an unsafe riding condition. Be sure the control cables are adjusted and routed correctly, and are free from damage.