2022 Kawasaki KLX 110R Tightening Torques of Nuts and Bolts Owner’s Manual

2022 Kawasaki KLX 110R Tightening Torques of Nuts and Bolts

Tightening Torques of Nuts and Bots

Location of nuts and bolts

Before the first ride of each day of operation, check the tightness of the nuts and bolts shown below. Check also that al cotter pins are in place and in good condition.

1. Front Fork Clamp Bolts
2. Handlebar Clamp Bolts
3. Rear Shock Absorber Bolt and Nut (Upper)
4. Front Axle Nut
5. Cylinder Head Nuts
6. Oil Filter Cap Bolts
7. Engine Oil Drain Bolt
8. Shift Pedal Bolt
9. Side Stand Bolt and Nut
10. Swingarm Pivot Shaft Nut
11. Rear Sprocket Nuts
12. Rear Shock Absorber Nut
    
13. Ower
14. Muffler Body Mounting Bolt
15. Steering Stem Head Nut
16. Brake Cam Lever Bolt
17. Rear Axle Nut
18. Kick Pedal Bolt < footpeg Mounting Bolts
19. Exhaust Pipe Holder Nuts ke Nipples
20. Spoke Nipples
21. Engine Mounting Nuts
22. rake Pedal Bolt

Torque Table

Tighten all nuts and bolts to the proper torque using an accurate torque wrench. An insufficiently tightened nut or bolt may become damaged or tall Out, possibly resulting in damage to the motorcycle and injury to the rider. An overtightened nut or bolt may become damaged, broken, or fall out.

• Replacement Parts
• Follow the specified tightening sequence.