2022 Kawasaki KLX 110R Throttle Limiter Owner’s Manual

2022 Kawasaki KLX 110R Throttle Limiter

Throttle Limiter

• A screw-type throttle limiter can be equipped to this motorcycle to decrease the maximum engine power for a novice rider. The throttle limiter function by restricting the turning degree of the throttle grip so that it opens to either 3/8 or 1/2 of full throttle.
• Kawasaki recommends raising the level of the throttle limiter step-by-step as follows; The 3/8 degree throttle limiter can be used for the beginning rider, 1/2 degree throttle limiter for the semi-skilled rider, and no throttle limiter for riders with more advanced skills.

NOTE

• Changing the position of the throttle limiter should only be done at the parents’ discretion. The longer screw is the 3/8 degree limiter, the short screw is the 1/2 degree limiter.
• Check that the throttle grip has 2 3 mm (0.088 0.12 in.) of play and turns smoothly.
• Remove the plug screw and locknut installed to the housing.
• Install the locknut of the plug screw to the throttle limiter.
• Screw the throttle limiter fully into the throttle housing and tighten the locknut.

NOTICE

Use only the Kawasaki screws supplied with the motorcycle. Substituting nonstandard screws can damage the throttle housing.

NOTE

• Store the uninstalled throttle limiter in a location where it will not be lost.
• Do not operate the motorcycle without inserting the throttle limiter or plugging the screw into the throttle housing. This is to keep dirt or water from entering the throttle housing.