2022 Kawasaki KLR650 Brake Light Switches Owner’s Manual

2022 Kawasaki KLR650 Brake Light Switches

Brake Light Switches

Brake Light Switch Inspection

• Turn the ignition switch on.
• The brake light should go on when the front brake is applied.
• If it does not, ask your authorized Kawasaki dealer to inspect the front brake light switch.
• Check the operation of the rear brake light switch by depressing the brake pedal. The brake light should go on after the proper pedal travel.A. Brake Pedal
  • B. 10 mm (0.39 in.)
• If the light does not come on, adjust the rear brake light switch.

Brake Pedal Travel
10 mm (0.39 in.)

Brake Light Switch Adjustment

• Remove the bolts, cover and collars.A. Bolts
  • B. Cover
  • C. Collars
• To adjust the rear brake light switch, move the switch up or down by turning the adjusting nut.A. Rear Brake Light Switch
  • B. Adjusting Nut
  • C. Lights sooner
  • D. Lights later

NOTICE
To avoid damaging the electrical connections inside the switch, be sure that the switch body does not turn during adjustment.

• Install the collars and cover.
• Tighten the bolts.
• A. Collars
• B. Cover
• C. Bolts