Front brake shoe inspection:
Checking brake shoe wear requires disassembling the brake. If the lining thickness becomes below the wear limit of 2.0 mm (0.08 im), replace the shoes as a set. These procedures should be performed by a Kawasaki dealer.
A. Lining thickness
Rear brake pads inspection:
A wear indicator is provided on each brake pod. The indicators allow checking the brake pads wear. Have the indicator checked by a Kawasaki dealer periodically. If the indicator reaches the wear limit line, replace the pads.
Front brake lever free play adjustment: The front brake lever free play should be adjusted to 10 20 mm (0.4 — 0.8 in) at the tip of the brake lever. If the free play is incorrect, adjust as follows:
HAZARD
Operating with improperly serviced or adjusted brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could lead to an accident.
HOW TO AVOID THE HAZARD
After servicing:
Replacement Of brake components requires professional knowledge. These procedures should be performed by Kawasaki dealer.
Brake fluid inspection:
Check if the fluid level is below the lower level mark through the inspection window.
HAZARD
Brake fluid contacting the skin or eyes.
WHAT CAN HAPPEN
May cause irritation.
HOW TO AVOID THE HAZARD
Avoid contacting brake fluid with the skin or eyes. In case of contact, flush thoroughly with water and call a doctor if your eyes were exposed.
NOTE
NOTICE
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…