2022 Jeep Wrangler Rear Swing Gate User Manual
REAR SWING GATE
The rear swing gate can be unlocked by using one of the following methods:
- Mechanical key (with mechanical lock — if equipped)
- Remote Keyless Entry key fob (if equipped)
- Power door unlock switch on the front doors (if equipped)
- Passive Entry swing gate handles (if equipped) To open the swing gate, pull on the handle.
NOTE
Close the rear flip-up window before attempting to close the swing gate (hardtop models only).
WARNING
Driving with the flip-up window open can allow poisonous exhaust gases into your vehicle. You and your passengers could be injured by these fumes. Keep the flip-up window closed when you are operating the vehicle.
CAUTION
Do not push on the rear wiper blade when closing the rear flip-up window, as damage to the blade will result.
NOTE
The swing gate hinges and check strap may require cleaning if a squeak can be heard when opening the swing gate. Progressive accumulation of dirt or debris on the check strap arm may cause the failure of the check strap, requiring replacement. For further information on vehicle cleaning procedures, see Ú page 411.
CARGO AREA FEATURES
Trail Rail Cargo Organizer — If Equipped
If your vehicle is equipped with the Trail Rail system, a rail will be found built into the floor on either side of the cargo area. Each rail contains an adjustable anchor loop that can be used to secure cargo. The position of the adjustable anchor loop can be adjusted by sliding the loop along the rail. To adjust the anchor loop, push down on the center button while sliding the loop along the rail to the desired position. Release the button and move the loop slightly to the next fixed position in the notches of the rail.
- Lift the loop to use.
