2022 Jeep Grand Cherokee Wheel and Tire Torque User Guide
WHEEL AND TIRE TORQUE SPECIFICATIONS
Proper lug nut/bolt torque is very important to ensure that the wheel is properly mounted to the vehicle. Any time a wheel has been removed and reinstalled on the vehicle, the lug nuts/bolts should be torqued using a properly calibrated torque wrench using a six-sided (hex) deep wall socket.
TORQUE SPECIFICATIONS
| Lug Nut/Bolt Torque | **Lug Nut/ Bolt Size | Lug Nut/Bolt Socket Size |
| 130 Ft-Lb (176 N·m) |
M14 x 1.50 | 22 mm |
- Use only authorized dealer-recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
- Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or lose particles.
- Tighten the lug nuts/bolts in a star pattern until each nut/bolt has been tightened twice. Ensure that the socket is fully engaged on the lug nut/bolt (do not insert it half way).
NOTE: If in doubt about the correct tightness, have them checked with a torque wrench by an authorized dealer or service station. After 25 miles (40 km), check the lug nut/bolt torque to be sure that all the lug nuts/bolts are properly tightened.
WARNING
To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts/bolts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury.