2022 Jeep Grand Cherokee Driver and Passenger Seat Memory Settings User Guide

2022 Jeep Grand Cherokee Driver and Passenger Seat Memory Settings User Guide

DRIVER AND PASSENGER MEMORY SETTINGS

This feature allows the driver, and if equipped, also the front passenger to save up to two different memory profiles for easy recall through a memory switch. Each memory profile saves desired position settings for the following features:

Driver’s Side

• Seat position
• Easy Entry/Exit seat (if equipped)
• Side mirrors
• Power tilt and telescopic steering column (if equipped)
• A set of desired radio station presets

Passenger’s Side (If Equipped)

• Seat Position The memory settings switches are located on the front door panels, next to the door handle, and consist of three buttons:
• The set (S) button, is used to activate the memory save function.
• The (1) and (2) buttons are used to recall either of two saved memory profiles.

NOTE

1. Your vehicle is equipped with two key fobs, each can be linked to either driver’s side memory position 1 or 2.
2. Front passenger memory settings cannot be linked to a key fob

PROGRAMMING THE MEMORY FEATURE

To create a new memory profile, perform the following:

NOTE: Saving a new memory profile will erase the selected profile from memory.

• Place the vehicle’s ignition in the ON/RUN position (do not start the engine).
• Adjust all memory profile settings to desired preferences (i.e., seat, side mirror, power tilt/telescopic steering column [if equipped], and radio station presets).
• Push and release the set (S) button on the memory switch.
• Within five seconds, push and release either of the memory buttons (1) or (2). The instrument cluster display will indicate which memory position has been set.

NOTE: Memory profiles can be set without the vehicle in PARK, but the vehicle must be below 5 mph (8 km/h) to recall a memory profile.

LINKING AND UNLINKING THE KEY FOB TO MEMORY

Your key fobs can be programmed to recall one of two saved driver’s side memory profiles.
NOTE: Before programming your key fobs you must select the “Personal Settings Linked To Key Fob” feature through the Uconnect Settings page 204. To program your key fobs, perform the following:

• Place the vehicle’s ignition in the OFF position.
• Select a desired driver’s side memory profile, 1 or 2.
• Once the profile has been recalled, push and release the set (S) button on the memory switch.
• Within five seconds, push and release button (1) or (2) accordingly. “Memory Profile Set” (1 or 2) will display in the instrument cluster.
• Push and release the lock button on the key fob within 10 seconds.

NOTE: Your key fobs can be unlinked from your driver’s side memory settings by pushing the set (S) button, and within 10 seconds, pushing the unlock button on the key fob.

MEMORY POSITION RECALL

NOTE: Memory Recall is available when not in PARK, if the vehicle speed is below 5 mph (8 km/h).

• To recall a memory settings profile using the memory switches, push the memory button (1) or (2) on the memory switch.
• To recall the driver’s side memory settings using the key fob, push the unlock button on the key fob linked to memory position 1 or 2.

A recall can be canceled by pushing any of the memory buttons during a recall (S, 1, or 2), or by pushing any of the seat adjustment switches. When a recall is canceled, the seat and power tilt/telescopic steering column (if equipped) will stop moving. A delay of one second will occur before another recall can be selected.