CLIMATE SETTINGS
Access the climate screen through the Climate app in the APPS screen. See APPS SCREEN. The climate screen displays the following air quality features:
- Front-Rear: Press tabs to select climate control for front or rear of cabin.
- Max defrost: Press to switch maximum defrost for the windshield on or off. The system directs dried air at the windshield for rapid windshield defrosting.
- Ionizer: The cabin air ionization technology reacts with air contaminants, to neutralize odors and pathogens. The ionizer emits charged particles which interact with pollen and pollutants to form larger particles. These larger particles are then filtered out or fall to the ground.
- Air direction: Directs air to face and chest.
- Air direction: Directs air to feet.
- Purify: Press to activate an enhanced PM2.5 filtration mode. Ionization and recirculation will be activated. The Purify function is timed for 30 mins.
- Climate on-off: Toggles climate control on or off.
REAR CLIMATE CONTROL
To access the rear climate screen, use the climate app and select 2nd Row from the top of the screen. See APPS SCREEN.
WARNING
In the interest of safety, only operate or adjust the system when it is safe to do so. Driver distraction can lead to accidents, potentially causing serious injury or death.
WARNING
Do not adjust the touchscreen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents, causing serious injury or death.
To adjust the rear seat climate settings via the Climate app:
- Cabin zone soft keys: Touch to select a cabin zone. Available cabin zones vary, dependent on vehicle specification.
- AUTO mode: Touch to switch automatic operation on or off.
- Temperature adjustment arrows: Select the red arrow to increase and the blue arrow to decrease the temperature. The temperature setting is displayed between the arrows.
- Air distribution to the face icon: Touch to switch on or off.
- Air distribution to the feet icon: Touch to switch on or off.
- Settings icon: Touch to select the settings screen and then select Climate. See CLIMATE SETTINGS.
The rear climate can be adjusted with the controls located in the rear of the center console.
Control the rear climate as follows:
- Press to switch between cabin temperature control and rear seat temperature control. See HEATED SEATS and CLIMATE SEATS.
- Temperature controls: Rotate to adjust the cabin or seat temperature.
- AUTO control button: Press to switch automatic operation on.
- Blower speed: Rotate to the adjust blower speed.
- Air distribution to the face button: Press to switch on or off.
- Air distribution to the feet button: Press to switch on or off.
- Sync: The LED illuminates to show that the rear climate controls have been synchronized to the driver’s settings or that the controls are locked.
NOTES
Some of the icons have an LED indicator backlight that illuminates to confirm selection.
NOTES
In addition to the selectable controls, the rear climate screen displays symbols that indicate the status of heating and ventilation functions.
NOTES
If the climate control system is switched off, selecting the rear AUTO icon switches the system on.
NOTES
If the system is in defrost mode, all rear controls are disabled and no airflow is available to the rear occupants.
SEAT COMFORT AND ADJUSTMENT
FRONT AND REAR SEAT COMFORT AND ADJUSTMENT:
To access the Seats screen, use the Seats app. See APPS SCREEN.
Control the seat comfort and adjustment as follows:
- Climate seating on/off icon: Touch to switch seat heating or cooling on/off next to the left- or right-hand seat.
- Front seats control: Touch to access front seat climate control.
- Rear seats control: Touch to access rear seat climate control.
- Seat temperature control: A positive number and red seat color indicates seat heating. A negative number and blue color indicates seat cooling. Seat temperature intensity is available between 0 and 3 for heating, 0 and -3 for cooling. See CLIMATE SEATS.
- SEAT HEAT seats sub-menu. The current selected sub-menu for seat temperature adjustment.
- Heated center armrest control. Touch to activate center armrest heating.
- Seat base control. Touch to adjust. A blue color indicates seat base cooling, red color indicates seat base heating.
- Seat backrest control. Touch to adjust. A blue color indicates backrest cooling, red color indicates backrest heating.
- Settings icon: Accesses the climate control settings. See CLIMATE SETTINGS.
HEATED SEATS
NOTES
Heated seats consume a large amount of battery power. They only operate when the engine is running.
NOTES
The heated rear seats (non-climate) can only be operated by pressing the buttons located at the rear of the center console.
Press the relevant heated seat button to switch the required heated seat on at the maximum setting. The three LED indicators in the button illuminate.
Press a second time to set the heated seat at the medium setting. Two LED indicators illuminate.
Press a third time to set the heated seat at the lowest setting. One LED indicator illuminates.
Press a fourth time to switch off.
NOTES
The heated front seats are controlled via the touchscreen. See CLIMATE SEATS.
CLIMATE SEATS
NOTES
The climate seats only operate when the engine is running.
The SEATS seat climate control menu can be accessed via the Climate app. See APPS SCREEN. Select the COMFORT sub-menu.
To adjust the seat temperature:
- Touch the left-hand or right-hand seat base or seatback icon.
- Use the rotary controls to adjust the seat temperature. See FRONT CLIMATE CONTROL.
NOTES
The touchscreen displays the selected temperature status for the selected seat zone. The status range is: red for heated operation and blue for cooled operation.
NOTES
The rotary control displays a numeric + or – status. The outline of the rotary control illuminates red for heated operation and blue for cooled operation.
SEAT MASSAGE
NOTES
Seat massage does not operate when the vehicle’s interior temperature is in extreme cold or hot climate conditions.
Seat massage only operates when the engine is switched on.
NOTES
Seat massage pauses for 5 seconds if any adjustments are made to the lumbar, bolster, or shoulder sections of the seat.
To access the seat massage screen, touch the seats icon (1) on the lower touchscreen. Touch the respective seat massage icon (4). See SEAT COMFORT AND ADJUSTMENT.
- Touch the power icon for the respective seat to switch the selected seat massage on or off. See SEAT COMFORT AND ADJUSTMENT.
- Touch the top seat zone icon for the respective seat. See SEAT COMFORT AND ADJUSTMENT.
- Touch the icon of the desired massage program: Rolling, Up, Down, Upper Back, or Lower Back massage.
Touch the icon of the desired massage format: Wave, Pulse, Pulse Duo, or Combination.
NOTES
On vehicles with executive class seating, an additional format of Hot Stone is available. Hot stone provides increased central heat for the spine.
- Rotate the outer part of the rotary control to adjust the seat massage intensity. See SEAT COMFORT AND ADJUSTMENT.
NOTES
The outline of the rotary control illuminates to indicate the level of seat massage intensity.
Auto Massage can be set in Seat Settings. See SEAT SETTINGS.
NOTES
The massage programs have a 20 minute cycle. Reselect for repeated use.
SEAT SETTINGS
Seats settings can be accessed via the SEATS app on the touchscreen. See APPS SCREEN.
The following options can be selected:
- Auto Massage: Switch the automatic massage feature On or Off.
- Time delay: Touch to select the time delay options. A time delay for the seat massage can be set from the start of a journey.
TEMPERATURE DIFFERENTIATION
The temperatures selected via the climate control system are perceived values. The system operates to achieve these selected values. The selected value does not represent the output temperature from the air vents. Air vent output temperature varies as the system automatically adjusts the vent outputs to achieve the set temperatures.
The actual temperature in the cabin may differ from the set temperatures due to internal and external factors, including ambient temperature, sun load, and direction. The climate control system automatically adjusts the airflow level, direction, and temperature to compensate for these internal and external factors. Automatic adjustments in the air vent outputs may result in some temperature differentiation within the cabin.