Always disable the auto stop/start system before wading. Failure to do so could cause damage to the vehicle.
The auto stop/start system is designed to improve fuel efficiency and automatically activates when the vehicle’s ignition is switched on. Unless it is required to support other vehicle systems, the engine switches off when the vehicle is stationary, e.g., at traffic lights. When the engine stops, it is referred to as an auto stop.
When On demand hold is not active and the brake pedal is released, or a drive gear is selected, the engine automatically restarts. When the engine restarts, it is referred to as an auto start. See BRAKE HOLD
Operation of the auto stop/start system is indicated by a status icon in the instrument panel. See AUTO STOP/START (GREEN).
When activated, the auto stop/start system does not always stop the engine when the vehicle is stationary. The system may also restart the engine before setting off.
To trigger an auto stop, drive forward with Drive (D) or Sport (S) selected and stop the vehicle. Fully press the brake pedal to make sure the vehicle is stationary.
The following conditions inhibit an auto stop:
The instrument panel displays an information lamp when the vehicle is stationary and the auto stop/start system is active, but operation is inhibited. See AUTO STOP/START INHIBIT (WHITE).
To trigger an auto start when the On hold demand function is not active, release the brake pedal with Drive (D) or Sport (S) selected.
The engine also restarts if one of the following occurs:
To deactivate the auto stop/start system, touch the Auto Stop/Start Off icon on the touchscreen QUICK menu. See TOUCHSCREEN DISPLAY SETTINGS.
Depending on road conditions, the auto stop/start system may deactivate if Adaptive Surface Response (AdSR) is selected.
When the auto stop/start system is deactivated, a status icon is displayed. See AUTO STOP/START OFF (WHITE).
The instrument panel displays the message Auto Stop/Start is not available if the button is pressed while the system is unable to operate..
The auto stop/start system automatically reactivates the next time the vehicle’s ignition is switched on.
Vehicles with a 48v system are equipped with an auto stop on the move feature. The auto stop on the move feature switches off the engine while the vehicle is moving if:
When the brake pedal is released, the engine automatically restarts.
The operation of the auto stop on the move feature is indicated by a status icon in the instrument panel. See AUTO STOP/START (GREEN).
The auto stop on the move feature is deactivated if auto stop/start is deactivated. See DEACTIVATING AUTO STOP/START.
During an auto stop, the driver exit feature prevents the vehicle’s ignition from being inadvertently left on. If the feature detects that the driver is not present, it automatically switches off the vehicle’s ignition system. Once the vehicle’s ignition is switched off, the vehicle can be locked, if required. See LOCK CONFIRMATION.
The driver exit feature is only active when an auto stop has taken place and the engine is not running.
If the vehicle is left in a driveable condition with the engine running, the driver exit feature does not switch the vehicle’s ignition off. Failure to make sure the vehicle is left in a safe condition could lead to serious injury or death.
If Park (P) is selected, the driver exit feature switches the vehicle’s ignition off if the driver’s seat belt is unbuckled.
Access the comprehensive 2010-2018 VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively.…
Explore the comprehensive VW Jetta Passenger Fuse Box Diagram to troubleshoot electrical issues effectively. Understand…
Under Hood Fuse Box Location Remove the front luggage compartment cover. Under Hood Fuse Box…
2022 Kawasaki NINJA H2 SX SE Brake Lever Adjuster Owner's Manual NOTICE Only adjust the front…
2023 Land Rover Range Rover Evoque Exiting The Vehicle SINGLE LOCKING WARNING Before exiting the…
2023 Land Rover Range Rover Evoque Front Seats FRONT SEAT SAFETY Make sure to read…