2022 Jaguar I-Pace Wheel Changing
WHEEL CHANGING SAFETY
Make sure to read and fully understand the following warnings. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death.
NOTES
If in any doubt regarding the ability to carry out the instructions, or comply with warnings, seek assistance.
If in any doubt regarding the ability to carry out the instructions, or comply with warnings, seek assistance.
WARNING
Always find a safe place to stop, off the highway and away from traffic. Switch on the hazard warning lights to alert all traffic of the obstruction. Apply the Electric Parking Brake (EPB) and engage Park (P). Switch the vehicle off by pressing the START/STOP button and remove the smart key from the vehicle.
Always find a safe place to stop, off the highway and away from traffic. Switch on the hazard warning lights to alert all traffic of the obstruction. Apply the Electric Parking Brake (EPB) and engage Park (P). Switch the vehicle off by pressing the START/STOP button and remove the smart key from the vehicle.
WARNING
If available, place a warning triangle at a suitable distance behind the vehicle, facing toward oncoming traffic.
If available, place a warning triangle at a suitable distance behind the vehicle, facing toward oncoming traffic.
NOTES
Different countries have different traffic laws. Carrying and/or using warning triangles may be required by law when stopping at the side of a highway. The driver is responsible for staying informed about road regulations, and for complying with local traffic laws.
Different countries have different traffic laws. Carrying and/or using warning triangles may be required by law when stopping at the side of a highway. The driver is responsible for staying informed about road regulations, and for complying with local traffic laws.
WARNING
In an emergency or a breakdown situation, wear a reflective jacket if stopped at the side of the road and working around the vehicle.
In an emergency or a breakdown situation, wear a reflective jacket if stopped at the side of the road and working around the vehicle.
NOTES
Different countries have different traffic laws. Carrying and/or wearing reflective jackets may be required by law. The driver is responsible for staying informed about road regulations, and for complying with local traffic laws.
Different countries have different traffic laws. Carrying and/or wearing reflective jackets may be required by law. The driver is responsible for staying informed about road regulations, and for complying with local traffic laws.
WARNING
- Make sure that all passengers and animals are out of the vehicle and in a safe place, away from the highway.
- Make sure that the vehicle and jack are both on firm, level ground. Do not jack the vehicle if it is over a metal grating or manhole cover.
- Make sure that the front wheels are in the straight ahead position and engage the steering lock.
- Always use the complete jacking lever assembly throughout the wheel changing process, to minimize any chance of accidental injury. Position the jack from the side of the vehicle, in line with the appropriate jacking point.
- Never place anything between the jack and the ground, or between the jack and the vehicle.
- Do not attempt to raise the vehicle, unless the jack head is fully engaged in the jacking point. Only jack the vehicle using the approved jacking points.
THAT NO PERSON SHOULD PLACE ANY PORTION OF THEIR BODY UNDER A VEHICLE THAT IS SUPPORTED BY A JACK.
- The jack is designed for wheel changing only. Never work beneath the vehicle with the jack as the only means of support. Always use correctly-rated vehicle support stands, before putting any part of the body beneath the vehicle.
- When jacking the vehicle, make sure that all precautions are taken to prevent vehicle movement. As an additional precaution, it is recommended that the wheels of the vehicle are chocked.
- When one rear wheel is lifted off the ground, the transmission Park (P) position does not prevent the vehicle from moving. The vehicle can potentially slip off the jack, as the Electric Parking Brake (EPB) operates only on the rear wheels. Use a wheel chock when jacking the vehicle.
- Always chock the wheel diagonally opposite the wheel to be changed. Chock the front of a front wheel or the rear of a rear wheel.
- If jacking the vehicle on a slight slope is unavoidable, place the chocks on the downhill side of the two opposite wheels. Two chocks must be used if this is the case.
- Take care when loosening the lug nuts. The lug wrench may slip off if not properly attached, and the lug nuts may give way suddenly. Either unexpected movement may cause an injury.
- Do not start the vehicle while the vehicle is supported only by a jack.
- Remove the spare wheel before jacking the vehicle, to avoid destabilizing the vehicle when raised. Take care when lifting the spare wheel and removing the punctured wheel. The wheels are heavy and can cause injuries if not handled correctly.
- After wheel changing, always secure the tools, jack and the replaced wheel in the correct storage positions. Such objects, if not properly stored, can become propelled objects in a crash or rollover.
TOOL KIT
WARNING
Make sure the relevant safety warnings have been read and understood before using the tool kit. WHEEL CHANGING SAFETY.
Make sure the relevant safety warnings have been read and understood before using the tool kit. WHEEL CHANGING SAFETY.
The tool kit bag is attached to the spare wheel with velcro straps. See REMOVING THE SPARE WHEEL.
The location of the tools are as follows:
- Tool kit strap.
- Lug wrench.
- Jack assembly. Observe the instructions printed on the jack.
NOTES
Tool types and positions may vary from the illustration.
Tool types and positions may vary from the illustration.
NOTES
Examine the jack occasionally. Clean and grease the moving parts, particularly the screw thread, to prevent corrosion.
Examine the jack occasionally. Clean and grease the moving parts, particularly the screw thread, to prevent corrosion.
NOTES
Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.
Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.
The locking lug nut adapter is stored under the luggage compartment floor panel
REMOVING THE SPARE WHEEL
Make sure to read and fully understand the following warnings. Failure to comply with the safety instructions may result in an accident, leading to serious injury or death.
WARNING
Make sure the relevant safety warnings have been read and understood before removing the spare wheel. See WHEEL CHANGING SAFETY.
Make sure the relevant safety warnings have been read and understood before removing the spare wheel. See WHEEL CHANGING SAFETY.
WARNING
Keep the rear seats in an upright position when a spare or recovered wheel is on the load board.
Keep the rear seats in an upright position when a spare or recovered wheel is on the load board.
WARNING
Do not store the wheel while the vehicle is raised on the jack.
Do not store the wheel while the vehicle is raised on the jack.
NOTES
Before removing the spare wheel, take note of its storage position. The wheel to be changed must be correctly stored and secured in its place.
Before removing the spare wheel, take note of its storage position. The wheel to be changed must be correctly stored and secured in its place.
The spare wheel is stored in the spare wheel bag inside the luggage compartment.
To remove the spare wheel:
- Loosen the straps through the straps’ locking buckles.
- Separate the four carabiners from the lashing eyes.
NOTES
Do not remove the four carabiners from the straps. - Lift and take out the bag with the help of the lifting handle.
- Unzip and open the top lid of the bag.
- Open the velcro strap on the bag.
- Remove the spare wheel and the tool kit assembly from the bag.
NOTES
The tool kit is stored in the foam tray. The foam tray is attached to the spare wheel with velcro straps. - Release the velcro straps and remove the foam tray.
- Remove the jack and the lug wrench from the foam tray.
ACCOMMODATING THE SPARE OR THE RECOVERED WHEEL:
- Place the jack and the lug wrench into the foam tray.
- Attach the foam tray to two spokes on the spare wheel, using the velcro straps.
NOTES
The foam tray cannot be attached to the spokes once the dirt cover is in place. - Place the spare wheel on the floor with wheel spokes facing upward.
NOTES
When storing the recovered road wheel use the bag provided to prevent damaging or soiling the interior of the vehicle. - Remove the dirt cover from the compartment at the edge of the inner side of the spare wheel bag and place the spare wheel inside.
- Unzip the spare wheel bag with the bottom zip for increased space. Place it over the spare or recovered wheel, with the open lid facing the wheel.
NOTES
Keep the velcro strap of the spare wheel bag open while placing the bag on the spare wheel. Failure to do so may not allow the bag to cover the spare wheel. - Close the velcro strap, then invert the bag and spare wheel so that the zipped opening is facing upward.
WARNING
Hold the spare wheel firmly while tilting the spare wheel bag. Failure to do so may allow the spare wheel to slip from the spare wheel bag and cause personal injury. - Close the top lid and the upper zipper of the spare wheel bag.
- Lift the spare wheel bag by the lifting handle and place it in the luggage compartment.
NOTES
Make sure that the lifting handle and the Jaguar logo are facing the open tailgate. - Engage the four carabiners to the lashing eyes.
- Tighten the straps over the spare wheel bag and secure them with the locking buckles.
IMPORTANT – USE OF SPARE TIRE
Make sure to read and fully understand the following warnings. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death.
WARNING
- Adhere to the instructions on the temporary-use spare wheel’s warning label, affixed to the wheel. Failure to do so may cause vehicle instability and/or tire failure.
- Where fitted, the temporary-use spare wheel is for temporary use only.
- Drive with caution while the temporary-use spare wheel is fitted.
- Make sure that an original size wheel and tire are fitted as soon as possible.
- Do not fit more than one temporary-use spare wheel at any one time.
- Do not exceed 50 mph (80 km/h) while the temporary-use spare wheel is fitted.
- The temporary-use spare wheel must be inflated to 60 psi (4.2 bar, 420 kPa) and cannot be repaired.
- Dynamic Stability Control (DSC) must be switched on while the temporary-use spare wheel is in use.
- Traction devices, such as snow chains, cannot be used with a temporary-use spare wheel.
NOTES
Before removing the spare wheel, take note of its storage position. The wheel to be changed must be correctly stored and secured in its place.
Before removing the spare wheel, take note of its storage position. The wheel to be changed must be correctly stored and secured in its place.
USING WHEEL CHOCKS
WARNING
Make sure the relevant safety warnings have been read and understood before using wheel chocks. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death. See WHEEL CHANGING SAFETY.
Make sure the relevant safety warnings have been read and understood before using wheel chocks. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death. See WHEEL CHANGING SAFETY.
NOTES
Wheel chocks are a useful addition to a vehicle’s tool kit.
Wheel chocks are a useful addition to a vehicle’s tool kit.
If required, a wheel chock can be stored with the vehicle’s tool kit. See TOOL KIT.
LOCKING LUG NUTS
NOTES
When the vehicle is first supplied, the lug nut adapter may be stored in the glovebox. If this is the case, the lug nut adapter must be moved to its correct storage position, as soon as possible. See TOOL KIT.
When the vehicle is first supplied, the lug nut adapter may be stored in the glovebox. If this is the case, the lug nut adapter must be moved to its correct storage position, as soon as possible. See TOOL KIT.
NOTES
Not all vehicles have locking lug nuts as standard parts.
Not all vehicles have locking lug nuts as standard parts.
CAUTION
The locking lug nut adapter must be correctly aligned and fully fitted to the locking lug nut before usage. Incorrect fitment can result in permanent damage to the locking lug nut adapter.
The locking lug nut adapter must be correctly aligned and fully fitted to the locking lug nut before usage. Incorrect fitment can result in permanent damage to the locking lug nut adapter.
CAUTION
Do not use air tools or power tools to remove or to refit the locking lug nut. Doing so may damage the locking lug nut or the adapter.
Do not use air tools or power tools to remove or to refit the locking lug nut. Doing so may damage the locking lug nut or the adapter.
Locking lug nut.
Locking lug nuts can be removed and fitted using only the special adapter provided. See TOOL KIT.
To release the locking lug nut:
- Fit the locking lug nut adapter onto the locking lug nut. Make sure that the locking lug nut adapter fully engages.
CAUTION
If the locking lug nut adapter is forced onto the locking lug nut, the adapter may be damaged beyond repair. - Locate the lug wrench over the locking lug nut adapter. Unscrew the lug nut by half a turn counter-clockwise.
- After raising the vehicle on the jack, remove the locking lug nut.
NOTES
Should a replacement locking lug nut adapter be required, consult an authorized retailer. It is advised to make a note of the locking lug nut adapter code number to allow a replacement to be sourced, if ever required. Depending upon the specification of the locking lug nut adapter, the code may be stamped on the locking lug nut adapter or supplied on a separate card.
Should a replacement locking lug nut adapter be required, consult an authorized retailer. It is advised to make a note of the locking lug nut adapter code number to allow a replacement to be sourced, if ever required. Depending upon the specification of the locking lug nut adapter, the code may be stamped on the locking lug nut adapter or supplied on a separate card.
WHEEL CHANGING
Make sure to read and fully understand the following warnings. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death.
WARNING
Make sure the relevant safety warnings have been read and understood before changing a wheel. See WHEEL CHANGING SAFETY.
Make sure the relevant safety warnings have been read and understood before changing a wheel. See WHEEL CHANGING SAFETY.
CAUTION
Only jack the vehicle using the jacking points described. Failure to do so may result in damage to the vehicle or the vehicle’s battery.
Only jack the vehicle using the jacking points described. Failure to do so may result in damage to the vehicle or the vehicle’s battery.
Before raising the vehicle:
- Remove the required tools from the vehicle. See TOOL KIT.
- Remove the spare wheel. See REMOVING THE SPARE WHEEL.
- Correctly position the wheel chocks. See WHEEL CHANGING SAFETY.
To change a wheel:
- Use the lug wrench to loosen the lug nuts of the wheel to be replaced. Turn half a turn counter-clockwise.
- Locate the jack under the relevant jacking point.
CAUTION
Do not allow the jack to contact the sill at any other point, as damage may result. - Turn the jack lever clockwise to raise, until the jack head locates into the jacking point. Make sure that the base of the jack is in full contact with the road surface.
- Raise the vehicle with a slow steady operation, until the wheel is clear of the ground.
WARNING
Avoid rapid, jerky actions. Rapid, jerky actions may cause the vehicle and jack to become unstable, which may result in an accident, leading to serious injury or death. - Remove the lug nuts. Place the lug nuts together where they cannot roll away.
- Remove the wheel and place it to one side.
CAUTION
Do not lay the wheel on its face, as this may damage the finish. - Fit the spare wheel to the hub.
- Refit the lug nuts. Lightly tighten the nuts. Make sure the wheel is making contact with the hub evenly.
- Make sure that the area under the vehicle is clear of obstructions. Lower the vehicle slowly and smoothly.
- With all of the wheels on the ground and the jack removed, fully tighten the lug nuts. Tighten the nuts, in the sequence shown in the illustration, to the correct torque of 98 lb.ft (133 Nm).
NOTES
If it is not possible to torque the lug nuts when a wheel is replaced, set to the correct torque as soon as possible.
If it is not possible to torque the lug nuts when a wheel is replaced, set to the correct torque as soon as possible.
If an alloy spare wheel is to be fitted, use a suitable blunt tool to knock the center cap out of the removed wheel. Use hand pressure only to press the center cap into the newly fitted spare.
Check and adjust the tire pressure as soon as possible. See TIRE PRESSURES.
NOTES
In the event of a puncture, the spare wheel can be used on either side of the vehicle. Make sure that the original wheel is replaced in its correct location as soon as possible.
In the event of a puncture, the spare wheel can be used on either side of the vehicle. Make sure that the original wheel is replaced in its correct location as soon as possible.